Online Standards Store
Rules for the classification and construction of nuclear ships and floating facilities (revision 2018)
Document status: Active
Rules for the classification and construction of nuclear support vessels (NSV Rules) (revision 2017)
Document status: Active
Guidance on the hazard analysis of accidental detonations and determination of parameters of their mechanical operation
Document status: Active
Safety provision when dealing with radioactive waste of ships and other floating crafts with nuclear reactors and radiation sources
Document status: Cancelled
Safety assessment of shallow ground repositories of radiation wastes
Document status: Active
Requirements to the contents of the report on the radiation safety condition at radiation hazardous sites of national economy
Document status: Not Active
Requirements to the Contents of an NPP Power Unit Decommissioning Programme
Document status: Active
Safety Ensuring in Radioactive Waste Management Generated from Mining, Processing and Use of Natural Resources
Document status: Active
Requirements to the Composition, Contents and Procedure of Submission to the RF Gosatomnadzor of Information on Safety Status of Ships Nuclear Installations under Operation
Document status: Active
Safety guide on nuclear energy use "Assessment of the Corrective Measures Effectiveness in Respect to Operational Violations at Nuclear Power Plants and Nuclear Research Installations and Analysis of Information Regarding NPPs and Nuclear Research Installations Operational Experience Feedback"
Document status: Active
Safety guide on nuclear energy use "Minimization of the Secondary Contamination of Territories, Communication Routes and Transport Means during Accidents Consequences Elimination at Nuclear Facilities. Methodology for Organization of Transport Schemes and Decontamination Units in Areas of Different Contamination Level"
Document status: Active
Safety guide on nuclear energy use "Recommendations to the Contents of Documents to Substantiate Standards for Maximum Permissible Emissions of Radioactive Substances into Atmosphere and Standards for Permissible Discharges of Radioactive Substances into Water Bodies"
Document status: Active
Safety guide on nuclear energy use "Minimization of Radiological Consequences in Respect to Population and Personnel in the Course of Elimination of Accidents Consequences at Units of Nuclear Power Plants. Methodology on Optimization of Protection Measures for Population and Territories"
Document status: Active
Recommendations on the Structure and Content of the Provision on Accounting and Control of Nuclear Material in Organizations Involved in Nuclear Material Handling, and Instructions on Accounting and Control of Nuclear Material in the Material Balance Area
Document status: Active
Recommendations for registration of the changed in operating conditions of the systems and elements of the nuclear fuel cycle facility shutdown at determination of the pssibility to reduce the scope of maintenance and implementation of the corresponding changes to the maintenance documentation of the nuclear fuel cycle facility
Document status: Active
Pipeline fittings. General requirements for carrying of fire resistance tests
Document status: Active
Pipeline fittings. Gate valves. Procedure for strength calculation
Document status: Active
Pipeline fittings. Bodies and caps. Static load strength rating
Document status: Active
Pipeline fittings. Bolts and studs Static load strength rating
Document status: Active
Pipeline fittings. Metals used in production of fittings. Part 1. Basic requirements for selection of materials
Document status: Active
Pipeline fittings. Metals used in production of fittings. Part 2. Material properties reference data
Document status: Active
Pipeline fittings. Metals used in production of fittings. Part 3. Foreign materials and their domestic equivalents
Document status: Replaced by ST CKBA 005.3-2009
Pipeline fittings. Metals used in production of fittings. Part 3. Foreign materials and their domestic equivalents
Document status: Active
Pipeline fittings. Cryogenic fittings. General technical specifications
Document status: Active
Pipeline fittings. Organization and carrying out of pipeline fitting industrial safety expert review operated at hazardous production facilities
Document status: Cancelled
Pipeline fittings. Organization and carrying out of pipeline fitting industrial safety expert review operated at hazardous production facilities
Document status: Active
Pipeline fittings. Calculation, reliability and safety evaluation during design stage
Document status: Cancelled
Pipeline fittings. Calculation, reliability and safety evaluation during design stage
Document status: Active
Pipeline fittings. Electrical connectors for motor actuators of nuclear power stations. General technical specifications
Document status: Active
Pipeline fittings. Studs, bolts, nuts and washers for pipeline fittings. Technical requirements
Document status: Active
Pipeline fittings. Welding of fittings to pipeline. Technical requirements
Document status: Active
Pipeline fittings. Steel castings. General technical specifications
Document status: Active
Pipeline fittings. Quality control program for fittings of the nuclear power stations
Document status: Active
Pipeline fittings. Heat treatment of parts, blanks and welded assemblies made of high-alloy steels, corrosion resistant and heat-resistant alloys
Document status: Active
Pipeline fittings. General technical specifications
Document status: Active
Pipeline fittings. Heat treatment of blanks (parts) made of titanium and titanium alloys. Typical process
Document status: Active
Pipeline fittings. Sealings made on the basis of thermally expanded graphite. General technical requirements
Document status: Active
Pipeline fittings. Procedure for hydraulic calculation of low-noise reducing device with constant hydraulic resistance
Document status: Active
Painting and preservation of the pipeline fittings and actuators supplied for nuclear power stations. Typical operating procedure for cleaning, painting and preservation
Document status: Active
General purpose industrial pipeline fittings supplied for nuclear power stations. General technical requirements
Document status: Active
Pipeline fittings. Tables of figures. Rules for designation and registration
Document status: Replaced by ST CKBA 023-2015
Pipeline fittings. Tables of figures. Rules for designation and registration
Document status: Active
Pipeline fittings. Determination of remaining lifetime and reliability factor of pipeline fittings
Document status: Active
Pipeline fittings. Welding and quality control of welding joints. Technical requirements
Document status: Active
Pipeline fittings. Heat treatment of parts made of non-ferrous alloys on the basis of copper and nickel. Typical process
Document status: Active
Pipeline fittings. Periodical tests. General requirements
Document status: Active
Pipeline fittings. Procedure for experimental determination of hydraulic and cavitation performances
Document status: Active
Pipeline fittings. Screw-type cylindrical springs. General technical specifications
Document status: Active
Pipeline fittings. Passport. Rules for design and format
Document status: Cancelled
Pipeline fittings and actuators. Passport. Rules for design and format
Document status: Active
Pipeline fittings. Warranty obligations. Recommendations for setting and calculation
Document status: Active
Pipeline fittings. Gland sealings. Leak-tightness norms
Document status: Active
Pipeline fittings. Designation of the design documentation and technical specifications. Design documentation scope
Document status: Replaced by ST CKBA 035-2017
Pipeline fittings. Designation of the design documentation and technical specifications. Design documentation scope
Document status: Active
Pipeline fittings. Tables of figures and conventional symbols. Reference book
Document status: Replaced by ST CKBA 036-2014
Pipeline fittings. Tables of figures and conventional symbols. Reference book
Document status: Replaced by ST CKBA 036-2017
Pipeline fittings. Tables of figures and conventional symbols. Reference book
Document status: Active
Pipeline fittings. Ball seals. Design, basic dimensions and specifications
Document status: Active
Pipeline gate valves. Changing grade of gate sealability depending on operating conditions and in the process of operation
Document status: Active
Pipeline fittings. Periodical tests of bellows. General requirements
Document status: Active
Pipeline fittings. Control valves. Procedure for selection in automatic control systems
Document status: Active
Pipeline fittings. Incoming materials, semifinished products and components inspection
Document status: Active
Pipeline fittings. Electrolytic, chemical, anodic and diffusion coatings
Document status: Active
Pipeline fittings. The order of rating and control of reliability and safety
Document status: Active
Pipeline fittings. Screw-type cylindrical springs. Procedure for calculation
Document status: Active
Pipeline fittings. Welding of parts made of titanium and titanium alloys. Specifications and quality control
Document status: Active
Pipeline fittings. Liquid end of the body of casted double-seat valves. Design, dimensions, conditional capacity
Document status: Active
Pipeline fittings. Liquid end of the body of casted single-seat valves. Form, dimensions and resistance coefficients
Document status: Active
Pipeline fittings. Provision of no-failure operation during production
Document status: Active
Pipeline fittings. Iron castings. Technical requirements
Document status: Active
Pipeline fittings. Non-ferrous alloy castings. Technical requirements
Document status: Active
Pipeline fittings. Requirements to materials of fittings used for hydrogen sulfide-containing media
Document status: Active
Pipeline fittings. Deposit welding and quality control of deposited surfaces. Technical requirements
Document status: Active
Pipeline fittings. Structural materials for the parts of pipeline fittings operating in corrosion active mediums. Technical requirements
Document status: Active
Pipeline fittings. Valve trims with polytetrafluorethylene sealing and composition materials. Specifications and methods for fixation of sealing rings
Document status: Active
Pipeline fittings. Types and grades of plastic materials used in production of pipeline fittings
Document status: Active
Pipeline fittings. Friction coefficients in pipeline fitting assemblies
Document status: Active
Pipeline fittings. Packing washers made of paronite and rubber. Dimensions and specifications
Document status: Active
Pipeline fittings. Antifriction lubricants. Field of use, consumption rates and application methods
Document status: Active
Pipeline fittings. Running threaded pairs. Basic dimensions and specifications
Document status: Active
Pipeline fittings. Temporary corrosion protection General requirements for selection of protection means and methods
Document status: Active
Pipeline fittings. Rotative action devices. Mounting dimensions
Document status: Not Active
Pipeline fittings. Dimensional tolerances of main elements of wedge-gate valve assemblies
Document status: Active
Pipeline fittings. Packing washers made of polytetrafluorethylene sealing and composition materials. Dimensions and specifications
Document status: Active
Pipeline fittings. Nomenclature of parameters. Data sheets for design and order
Document status: Active
Pipeline fittings. Rubber-fluoropolymer orifice plates for pipeline fittings of common application. Design, dimensions and specifications
Document status: Active
Pipeline fittings. Temperature-resistant spiral-wounded gaskets for "body-cap" connections. Types, basic dimensions and specifications
Document status: Active
Pipeline fittings. Shut-off gate valves with "metal-to-metal" sealing. Technical requirements
Document status: Active
Pipeline fittings. Dust-proof-and-moisture-proof sealings. Design, dimensions and specifications
Document status: Active
Pipeline fittings. Designation of materials in design documentation
Document status: Cancelled
Pipeline fittings. Methodological instructive regulations for carrying heat calculation of valves for Nuclear Power Plants
Document status: Active
Pipeline fittings. Torque moment and dimensions of the flywheels and handweels
Document status: Active
Pipeline fittings. friction units pivot-saddle and stem-bushing. Design and dimensions
Document status: Active
Pipeline fittings. Valve bosses and handwheels. Design, dimensions and specifications
Document status: Active
Pipeline fittings. Preparation of graphite lubricant
Document status: Active
Pipeline fittings. Characteristics nameplates. Types, dimensions and specifications
Document status: Active
Pipeline fittings. T-shaped grooves. Dimensions
Document status: Active
Pipeline fittings. Production certification. Welded joints perfomance technology
Document status: Active
Pipeline fittings. Procedure for carrying out seismic resistance tests
Document status: Replaced by ST CKBA 080-2015
Pipeline fittings. Procedure for carrying out seismic resistance tests
Document status: Active
Pipeline fittings. The order of passport recovery
Document status: Active
Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications
Document status: Replaced by ST CKBA 083-2016
Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications
Document status: Active
Pipeline elements. Components and assembly units made of titanium alloys for pipelines of nuclear power stations. General technical specifications
Document status: Active
Pipeline elements. Components and assembly units made of titanium alloys for pipelines of nuclear power stations. Types and dimensions
Document status: Active
Pipeline fittings. Engineering data and characteristics for strength calculation of fittings
Document status: Active
Pipeline fittings. Motor actuators. General technical specifications
Document status: Active
Pipeline fittings. Quality control program for fittings used for hydrogen sulfide-containing media
Document status: Active
Pipeline fittings. Patch work. Technical requirements
Document status: Active
Pipeline fittings. Air-operated and hydraulic actuators. General technical specifications
Document status: Active
Pipeline fittings. Determination of steel mechanical properties based on hardness measurement
Document status: Active
Pipeline fittings. Procedure for calculation of permissible loads from pipeline on nozzles for main oil pipelines
Document status: Replaced by ST CKBA 092-2014
Pipeline fittings for main pipelines. Design loads from pipelines. Procedure for calculation and numerical values
Document status: Active
Pipeline fittings. Fixed joints with cone spacers. Design and dimensions
Document status: Active
Pipeline fittings. Warranty service. The order and organization
Document status: Active
Pipeline fittings. Average trim life vs. specific loads on the sealing surfaces
Document status: Active
Pipeline fittings. Deposit welding repair. Technical requirements
Document status: Active
Pipeline fittings. Repair. Organization of repair and general guideline on repair
Document status: Active
Pipeline fittings. Connection unit of disk with disk holder for pressure relieve valve. Design, dimensions and specifications
Document status: Active
Pipeline fittings. Rubber-metal sealings for gate valves. Design, dimensions, production technique
Document status: Active
Pipeline fittings. Passivating treatment of blanks, castings, assemblies and parts made of corrosion-resistant steels and alloys
Document status: Active
Pipeline fittings. Glues and sealants. Grades. Basic parameters and application conditions
Document status: Active
Pipeline fittings. Metallic and non-metallic nonorganic coatings. Process
Document status: Active
Pipeline fittings. Oxidation of parts made of titanium alloys
Document status: Active
Pipeline fittings. Friction bearings made of composition materials. Design, dimensions and specifications
Document status: Active
Pipeline fittings. Collection of information about reliability at operation. Defect and fault analysis of products
Document status: Active
Pipeline fittings. Gland seal with fusable metal seal. Design and basic dimensions. Technical requirements
Document status: Active
Pipeline fittings. Packing washers with easily fusible filler. Design, basic dimensions, production technique
Document status: Active
Ship's pipeline fittings. Operating procedure for shelf-life expired fittings' operation permission
Document status: Active
Pipeline fittings. Ball valves. Procedure for strength calculation
Document status: Active
Sanitary rules of nuclear power plants design and operation (SP-AS-03)
Document status: Active
Prinicapl rules covering operation of nuclear power stations
Document status: Active
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Document status: Active
Requirements for safe operation and occupational safety for petroleum refining facilities
Document status: Active
The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
Document status: Active
Quality control program for products of nuclear power industry
Document status: Active
Conformity assessment system for the use of nuclear energy. Ultrasonic examination of welded joints with use of phased arrays technology. The procedure
Document status: Active
Conformity assessment system for the use of nuclear energy. Accessories for ultrasonic testing of base materials (semiproducts), welded joints and cladded surfaces of equipment and piping of nuclear power installations. General requirements
Document status: Active
Conformity assessment system for the use of nuclear energy. Steel castings for equipment and piping of nuclear power installations. The examination procedure
Document status: Active
Conformity assessment system for the use of nuclear energy. Welded joints of parts made of steels of different structural classes for equipment and piping of nuclear power installations. The ultrasonic examination procedure
Document status: Active
Conformity assessment system for the use of nuclear energy. The Information system for processing and storing of metal examination results. General provisions
Document status: Active
Conformity assessment system for the use of nuclear energy. Non-destructive examination of metal of nuclear power plant equipment and pipelines. The procedure of justification of volumes and periodicities
Document status: Active
Conformity assessment system for the use of nuclear energy. Norms of allowable discontinuities of the base metal, welded joints and deposited surfaces of equipment, pipelines of nuclear power plants. Development procedure
Document status: Active
Conformity assessment system for the use of nuclear energy. The cost of conformity assessment in the form of review technical documentation. The procedure for determining
Document status: Active
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination of technical documentation. requirements for expert organizations
Document status: Active
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of tests. The procedure
Document status: Active
Conformity assessment system for the use of nuclear energy. Development and production of active zones components of nuclear power facilities and ther assessment in the form of tests. The procedure
Document status: Active
Butt joint welds for NPP pipelines. Types and main dimensions
Document status: Active
Butt joint welds for NPP pipelines. Types and main dimensions
Document status: Active
Parts and elements of pipelines of nuclear power plants made of corrosion-resistant steel for pressure up to 2.2 MPa (22 kgf/sm2). Welded joints. Types and dimensions
Document status: Active
Pipeline fittings. Rolled steel forgings, pressworks and fabricated parts. Technical requirements
Document status: Active
Pipeline fittings. Heat treatment of blanks made of carbon and alloyed structural steels. Typical process
Document status: Active
General purpose industrial grade pipeline fittings. Paints and coatings. General technical specifications
Document status: Active
Federal Rules and Regulations in the Filed of Nuclear Energy Use 'Requirements to Full-Scope Simulators for Training of NPP Control Room Operators'
Document status: Active
Federal Rules and Regulations in the Filed of Nuclear Energy Use 'Provision for the Procedure of Announcement of Emergency, Prompt Information Communication and Arrangement for Emergency Assistance to Nuclear Power Plants in Case of Radiation-Hazardous Situations'
Document status: Active
Federal Rules and Regulations in the Filed of Nuclear Energy Use 'Rules for Investigation and Accounting of Violations at Operation and Decommissioning of Radiation Sources, Storage Facilities for Radioactive Substances and Radioactive Waste and at Management of Radioactive Substances and Radioactive Waste'
Document status: Active
Federal Rules and Regulations in the Filed of Nuclear Energy Use 'Conformity assessment rules of products subject to statutory requirements related to safety in the field of atomic energy uses, as well as the processes of its design (including survey), production, construction, installation, maintenance, operation, storage, transportation, realization, disposal and burial'
Document status: Active
Federal Rules and Regulations in the Filed of Nuclear Energy Use 'Provisions on Procedure of the Announcement of Emergency Preparedness, Emergency Situation, and Prompt Communication of Information in the Event of Radiation Hazardous Situations at Nuclear Fuel Cycle Enterprises'
Document status: Replaced by NP 078-24
Foundation beds for reactor rooms of nuclear power plants
Document status: Active
Norms of structural design of nuclear power plants with reactors of different types
Document status: Active
Basic provisions on scope and volume of surveys for selection of a nuclear power plant sSite (SPPNAE-87 Section 4.1)
Document status: Active
General Safety Regulations for nuclear thermal power plants (SSB 88/97). Also known as NP-001-97.
Document status: Replaced by NP 001-15
Selection of location for nuclear power plants. Basic safety criteria and requirements
Document status: Replaced by NP 032-19
Considerations external actions of natural and anthropogenic nature on nuclear and radiation hazardous objects
Document status: Replaced by NP 064-17
Norms of design of reinforced concrete structures of localizing safety systems for nuclear power plants
Document status: Active
Strength calculation rules of steel containments of nuclear power plants
Document status: Active
Typical content of technical evaluation of nuclear power plant safety
Document status: Replaced by NP 006-16
Basic provisions on welding of components of localizing safety systems of nuclear power plants
Document status: Active
Testing rules for welded joints of components of localizing safety systems
Document status: Active
Typical content of technical evaluation of safety of reactor unit
Document status: Replaced by NP 006-16
Nuclear safety rules for reactors of nuclear power plants
Document status: Replaced by NP 082-07
Requirements to quality assurance program for nuclear power plants
Document status: Withdrawn
Statement about the order of investigation and registration of violations in the operation of nuclear power plants
Document status: Replaced by NP 004-08
Safety rules for storage and transportation of nuclear fuel at nuclear power facilities
Document status: Replaced by NP 061-05
Safety requirements for handling radioactive substances from nuclear power plants
Document status: Withdrawn
Seismic stability design standards for nuclear power plants
Document status: Replaced by NP 031-01
Design and operation rules for emergency core cooling system and the system of heat removal from nuclear reactor to the ultimate heat sink
Document status: Active
Rules of strength calculation for equipment and pipelines of nuclear power plants
Document status: Active
Certification rules for welders of nuclear power plants equipment and pipelines
Document status: Active
Rules of arrangement and safe operation of equipment and pipelines for nuclear facilities
Document status: Replaced by NP 089-15
Equipment and pipelines of nuclear power units. Welding and alloying. General regulations
Document status: Replaced by NP 104-18
Equipment and pipelines of nuclear power units. Welding and alloying joints. Rules of control
Document status: Replaced by NP 105-18
Rules for design and safe operation of actuators of reactivity controls
Document status: Replaced by NP 086-12
Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power units. Ultrasonic testing. Part I. Control of basic materials (semi-finished materials)
Document status: Replaced by GOST R 50.05.05-2018
Unified control methods of basic materials (semiproducts), welded joints and fused deposition of equipment and pipelines of nuclear power plants. Visual and measuring inspection
Document status: Replaced by GOST R 50.05.08-2018
Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Radiographic examination
Document status: Replaced by GOST R 50.05.07-2018
Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Capillary method
Document status: Replaced by GOST R 50.05.09-2018
Standardized methods of control of basic materials (semifinished products), welded joints and surfacing equipment and piping of NPP. Ultrasonic inspection. Leakage. Gas and liquid methods
Document status: Replaced by GOST R 50.05.01-2018
Equipment and pipelines of nuclear power units. Arc welding of aluminum alloys in protective gases. Main provisions
Document status: Active
Equipment and pipelines of nuclear power units. Welded joints of aluminum alloys. Control rules
Document status: Active
Steel castings for nuclear power plants. Control rules
Document status: Active
Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination
Document status: Replaced by GOST R 50.05.02-2018
Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part III. Thickness measurement of monometals, metals and corrosion resistant coatings
Document status: Replaced by GOST R 50.05.03-2018
General provisions for design and operation of emergency power supply systems of nuclear power plants
Document status: Replaced by NP 087-11
Design rules of emergency power supply systems of nuclear power plants
Document status: Replaced by NP 087-11
Requirements to full-scope simulators for use in training of operators of nuclear power plant unit control room
Document status: Active
Requirements to the report on justification of safety of radioactive wastes storage buildings in part of outer impacts account
Document status: Active
Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part IV. Examination of welded joints of austenitic steels
Document status: Replaced by GOST R 50.05.04-2018
Unified control procedures for basic materials (semi-finished products), weld joints and weld deposition of equipment and pipelines of nuclear power units. Magnetic-particle inspection
Document status: Replaced by GOST R 50.05.06-2018