ASTM F2160-22a PDF

Full title and description

Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) — ASTM F2160‑22a. The specification defines material, dimensional, workmanship and performance requirements for OD‑controlled solid wall HDPE conduit, duct and innerduct intended for non‑pressure protection of fiber‑optic, communication, CATV and power cables (includes IPS sizing, SDR/DR and true‑size variants).

Abstract

ASTM F2160‑22a establishes requirements and test procedures (including elongation, impact and ovality tests) for HDPE conduit produced with controlled outside diameter (OD). It covers solid wall constructions with or without ribs and permits coextruded surfaces so long as finished conduit meets the specification requirements. The standard is intended to support underground and directional‑drill installations for telecom, ITS, SCADA and related utilities.

General information

• Status: Current (ASTM active standard, edition 2022A).
• Publication date: Approved Sept 1, 2022; published (document release) September 2022 (publication listings commonly show Sept 15, 2022).
• Publisher: ASTM International (American Society for Testing and Materials).
• ICS / categories: 29.120.10 — Conduits for electrical purposes; Plastic piping / conduit systems.
• Edition / version: F2160‑22a (2022A edition / revision of F2160).
• Number of pages: 7 pages (typical published PDF page count).

Scope

This specification covers OD‑controlled solid wall HDPE conduit, duct and innerduct for non‑pressure applications used to protect communication, fiber‑optic and power cables. It defines acceptable wall types (solid wall, with or without ribs), permissible sizing systems (IPS, SDR/DR, schedule and true‑size variants) and mandates dimensional and performance tests (ovality, elongation, impact, and related properties). It does not address installation methods beyond referenced performance for common underground installation techniques (HDD, plowing, open trench).

Key topics and requirements

• Controlled outside diameter (OD) manufacturing and dimensional tolerances (IPS sizing and true‑size/SIDR variants).
• Material requirements for high density polyethylene (HDPE) suitable for conduit use.
• Permitted constructions: solid wall with or without internal/external ribs; co‑extruded layers allowed if finished product meets requirements.
• Performance and test methods: elongation, impact, ovality and other referenced ASTM test methods (examples: D2122, D2412 and other plastics test methods referenced within).
• Applications and installation contexts: telecommunications, CATV, ITS, SCADA, highway lighting and other underground utilities (including HDD).

Typical use and users

Manufacturers of HDPE conduit, cable and utility contractors specifying conduit for underground and directional drilling installations, engineers and procurement professionals working on telecom, power distribution, ITS and municipal infrastructure projects, and testing laboratories performing ASTM compliance tests. Specifiers use F2160‑22a to ensure conduit dimensions and basic mechanical performance meet accepted industry practice.

Related standards

ASTM F2160 references and aligns with many ASTM test methods and related specifications for plastics and piping, including (but not limited to) ASTM D2122 (dimensions of thermoplastic pipe), D2412 (external loading characteristics), D638 (tensile properties of plastics), D1693 (environmental stress‑cracking) and other F17 committee documents governing plastic piping systems. Earlier and related product specifications include prior F2160 editions (for example F2160‑01 and F2160‑16) and companion conduit/innerduct standards used by utilities.

Keywords

HDPE conduit; solid wall; outside diameter (OD) control; true‑size; IPS; SDR; conduit specification; ASTM F2160‑22a; telecom conduit; underground utilities.

FAQ

Q: What is this standard?

A: ASTM F2160‑22a is the ASTM International specification that sets material, dimensional and performance requirements for OD‑controlled solid wall high density polyethylene (HDPE) conduit used to protect communication and power cables in non‑pressure installations.

Q: What does it cover?

A: It covers conduit construction types (solid wall, ribs allowed), acceptable sizing (IPS, SDR/DR, true‑size), required tests (ovality, elongation, impact, etc.) and general performance expectations for underground and directional‑drill applications.

Q: Who typically uses it?

A: Conduit manufacturers, specification engineers, procurement teams, utilities, installation contractors and testing laboratories who need to ensure products meet recognized dimensional and basic mechanical performance criteria.

Q: Is it current or superseded?

A: As of the 2022A edition it is published and listed as the current ASTM F2160 edition (approved Sept 1, 2022; published September 2022). Users should confirm the standard status with ASTM International for any updates after this date.

Q: Is it part of a series?

A: Yes — F2160 is maintained under ASTM Committee F17 (Plastic Piping Systems), Subcommittee F17.26, and sits alongside related pipe and conduit standards and referenced ASTM test methods. Prior editions (for example F2160‑01, F2160‑16) are part of the historical series of the same designation.

Q: What are the key keywords?

A: HDPE conduit; solid wall; outside diameter; OD controlled; true‑size; IPS; SDR; conduit specification; underground telecom.