DVGW G 5614 2013-12 PDF

Full title and description

STB DVGW G 5614 2013-12 — DVGW technical bulletin (G-series), published December 2013. This document is a technical rule/standard issued under the DVGW (Deutscher Verein des Gas- und Wasserfaches e.V.) framework, identified by the code G 5614 and issued as the 2013-12 edition. It provides definitions, technical requirements and guidance related to gas-industry components, systems or procedures covered by the G-series of DVGW rules.

Abstract

This product page summarizes the STB DVGW G 5614 2013-12 technical bulletin. The standard belongs to the DVGW G-series (gas-related technical rules) and was released in December 2013. It contains scope, normative references, terms and definitions, technical requirements, testing and inspection recommendations, and guidance for application and documentation. The bulletin is intended to support safe and compliant planning, manufacture, installation and operation practices within the gas sector.

General information

• Status: Published (2013). Users should verify the current legal/technical status with DVGW or the appropriate national authority before using it for compliance purposes.
• Publication date: December 2013 (2013-12).
• Publisher: DVGW (Deutscher Verein des Gas- und Wasserfaches e.V.).
• ICS / categories: Gas industry / gas distribution / gas equipment and systems (typical ICS groupings for gas technology and pipeline systems).
• Edition / version: 2013-12 edition (issue dated December 2013).
• Number of pages: Not specified here — consult the publisher for the definitive page count and table of contents.

Scope

STB DVGW G 5614 2013-12 sets out technical requirements, test criteria and application guidance applicable to the aspects of the gas system identified in the G 5614 identifier. The scope typically covers required characteristics of products or procedures, inspection and testing obligations, marking and documentation, and interfaces with related DVGW and national/European standards. It is intended for use where DVGW G-series rules apply and to harmonize practice across suppliers, system operators and inspection bodies.

Key topics and requirements

• Definitions and normative references relevant to the G 5614 subject area.
• Technical performance and material requirements for the components/procedures addressed.
• Inspection, testing and acceptance criteria (factory and on-site tests where applicable).
• Requirements for marking, documentation, traceability and records.
• Safety, installation and operational guidance to reduce risk and ensure conformity.
• Quality assurance, conformity assessment and recommended certification paths.

Typical use and users

The standard is typically used by gas network operators, equipment manufacturers, system integrators, design engineers, installation and maintenance contractors, inspection bodies and certification organizations. It supports procurement specifications, product design, installation practice, testing regimes and regulatory compliance where DVGW technical rules are referenced.

Related standards

STB DVGW G 5614 2013-12 is normally used alongside other DVGW G-series rules and may reference or be referenced by applicable DIN, EN and ISO standards relevant to the same technical area (materials, welding, pressure equipment, metering, safety systems etc.). Users should check the normative references and cross-referenced DVGW/European standards for complete compliance context.

Keywords

DVGW, STB, G 5614, 2013-12, gas industry, technical bulletin, gas distribution, testing, inspection, installation, safety, documentation

FAQ

Q: What is this standard?

A: STB DVGW G 5614 2013-12 is a DVGW technical bulletin (G-series) published in December 2013 that contains technical requirements and guidance for a specific topic within the gas sector identified by the code G 5614.

Q: What does it cover?

A: It covers definitions, technical requirements, testing and inspection criteria, marking and documentation, and application guidance relevant to the G 5614 subject area. For exact content and clause-level requirements consult the full document from DVGW.

Q: Who typically uses it?

A: Gas utilities, equipment manufacturers, installers, engineering consultants, inspection bodies and certification organizations use DVGW technical bulletins to design, procure, install and verify gas-related systems and components.

Q: Is it current or superseded?

A: This entry records the 2013-12 edition. Users should confirm the current status (active, revised or withdrawn) with DVGW or an official standards distributor before relying on it for compliance or design work.

Q: Is it part of a series?

A: Yes. G 5614 is part of the DVGW G-series of technical rules for gas. It may be linked to other DVGW, DIN, EN or ISO standards that cover related technical topics.

Q: What are the key keywords?

A: DVGW, G 5614, STB, gas standard, technical bulletin, testing, inspection, installation, safety, documentation.