VDE 0128-3 DIN EN 50107-3 2019-09 PDF

Full title and description

STB VDE 0128-3 / DIN EN 50107-3:2019-09 — Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL (electroluminescent) light sources with a nominal voltage not exceeding 1 000 V; excludes general lighting, traffic-related or emergency-purpose applications.

Abstract

This standard defines electrical safety and product requirements for finished luminous signs, light-artworks and architectural accent lighting that use discharge lamps, LEDs or electroluminescent sources up to 1 000 V nominal. It is the German adoption (VDE 0128-3 / DIN EN 50107-3) of EN 50107-3:2018 including corrigendum AC:2018 and focuses on hazards, protective measures, marking and verification tests while explicitly excluding general luminaire, traffic signal and emergency lighting rules.

General information

• Status: Standard — German version of EN 50107-3:2018 + AC:2018 (listed as valid in national catalogue).
• Publication date: 2019-09-01 (DIN edition / VDE release: September 2019).
• Publisher: DIN / VDE Verlag (German adoption of the European EN text).
• ICS / categories: 29.140.30 (fluorescent / discharge lamps) — also associated with lighting/building applications (e.g., 91.160 lighting subject area in VDE catalogue).
• Edition / version: DIN EN 50107-3:2019-09 — VDE 0128-3; German version of EN 50107-3:2018 including AC:2018.
• Number of pages: 41 pages (German edition).

Scope

The standard applies to finished luminous signs (including decorative/light-art works and architectural accent lighting) that incorporate discharge lamps, LED modules or electroluminescent (EL) sources with nominal voltages up to and including 1 000 V. It sets out electrical safety requirements, marking, documentation and test procedures for such products but expressly excludes equipment intended for general room illumination, traffic signalling and emergency/escape lighting.

Key topics and requirements

• Electrical safety: insulation, creepage/clearance, dielectric strength and protective earthing where applicable.
• Requirements for power-supply components (transformers, inverters, converters) and compatibility with LED/EL/discharge sources.
• Protective devices and circuit provisions (earth‑leakage, open‑circuit protection for high-voltage circuits referenced in related parts).
• Marking, instructions for safe installation, use and maintenance, and information to accompany the product.
• Test procedures: electrical tests, temperature and thermal endurance, ingress protection, mechanical robustness and verification of insulation and separations.
• Exclusions and interfaces: clarifies where general luminaire standards (e.g., EN 60598) or traffic / emergency lighting standards do not apply to these signs.

Typical use and users

Primary users are manufacturers of luminous signs and illuminated advertising, designers and specifiers of architectural accent lighting, testing and certification bodies, installers and maintenance contractors, and product safety/CE conformity assessors who need to ensure completed sign products meet electrical safety and marking requirements in European and national markets.

Related standards

This part is one of the EN 50107 series and references or interacts with related documents such as EN 50107-1 and EN 50107-2 (other parts of the series), EN 60598 (luminaires), EN 61347 series (lamp control gear), EN 62031 / EN 62384 (LED module requirements and control gear), HD 384 / HD 60364 (installation rules) and various product/component standards for transformers, connectors and wiring. The standard text and corrigendum also list numerous referenced standards for tests and protective devices.

Keywords

luminous signs, sign lighting, illuminated advertising, LED signage, electroluminescent (EL), discharge lamps, electrical safety, VDE 0128-3, DIN EN 50107-3, product standard, marking, installation instructions.

FAQ

Q: What is this standard?

A: DIN EN 50107-3:2019-09 (VDE 0128-3) is the German adoption of EN 50107-3:2018 (+ AC:2018). It is a product standard that specifies electrical safety, marking and test requirements for finished luminous signs and related accent lighting products using discharge lamps, LEDs or EL sources up to 1 000 V.

Q: What does it cover?

A: It covers the electrical safety requirements, protective measures, information and tests applicable to finished signs (luminous advertising, light-artwork, architectural accent lighting) but excludes general lighting, traffic signalling and emergency lighting purposes.

Q: Who typically uses it?

A: Manufacturers, product designers, testing and certification bodies, specifiers, installation contractors and safety/compliance engineers working with illuminated signs and accent lighting products.

Q: Is it current or superseded?

A: The DIN EN 50107-3:2019-09 (VDE 0128-3) entry is the German version of EN 50107-3:2018 with corrigendum AC:2018 and is listed in national catalogues as the applicable German edition dated September 2019. Users should always confirm the current status via the national standards body or official catalogue before relying on the text for compliance.

Q: Is it part of a series?

A: Yes — EN 50107 is a multi-part series. Part 1 and Part 2 address other voltage ranges and specific protective device requirements; Part 3 is the product standard for signs up to 1 000 V. Consult EN 50107-1 and EN 50107-2 for complementary requirements.

Q: What are the key keywords?

A: Luminous signs, LED signage, electroluminescent, discharge lamps, electrical safety, VDE 0128-3, DIN EN 50107-3, product standard, marking, protective devices.