TDS PDF

Silicone Rubber Extreme Low-Temperature Resistant 35 - 45. Original standard SAE AMS 3334F-2018 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3334G-2024

Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer. Original standard SAE AMS 3345f-2015 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3345G-2020

Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer. Original standard SAE AMS 3346G-2013 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3346H-2019

Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 - 55. Original standard SAE AMS 3347C-2014 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3347D-2020

Rubber- Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40°F (-40°C) For Elastomeric Parts in Aircraft Engine Oil, Fuel and Hydraulics Systems. Original standard SAE AMS 3353-2009 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3353A-2023

Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa·s) Viscosity. Original standard SAE AMS 3359B-2001 in PDF full version. Additional info + preview on request

Document status: Replaced by St SAE AMS3359C-2016