GOST 30332-2015 PDF

Full title and description

GOST 30332-2015 — "Изделия перо‑пуховые. Общие технические условия" (English: "Feather and down consumer goods. Specifications"). The standard establishes general technical requirements, marking, packaging, acceptance and test methods for household products that use feather‑and‑down semi‑finished fillers (pillows, duvets, cushions and similar items).

Abstract

This intergovernmental (GOST) standard sets mandatory technical specifications and control methods for consumer feather‑and‑down products intended for household use. It addresses filler types, quality parameters (moisture, cleanliness, hygiene), product marking and packaging, sampling and acceptance rules, and relevant test procedures referenced to other national and ISO methods. It replaces the earlier GOST 30332-95 and includes later editorial amendments.

General information

• Status: Active / in force.
• Publication date: Adopted 21 December 2015; introduced into force 1 July 2016.
• Publisher: Adopted by the Interstate Council for Standardization, Metrology and Certification and introduced for use by the Federal Agency for Technical Regulation and Metrology (Rosstandart); text published by "Standartinform".
• ICS / categories: Textile and related product classifications (OKS/OKC references shown in registries: 61.020; 97.160; related OKS 59.040 in some catalogs).
• Edition / version: ГОСТ 30332-2015 (current edition, with amendments published subsequently).
• Number of pages: Approximately 15 (catalog entries list 15–16 pages depending on the publisher edition).

Registry and publication details as recorded in standards catalogues and document repositories.

Scope

The standard applies to household consumer items manufactured with a feather‑and‑down semi‑finished filler (for example pillows, duvets, cushions and similar bedding and soft‑furnishing products). It specifies technical requirements for filler types and quality, hygiene and chemical safety limits (including free formaldehyde where applicable), physical properties (moisture content, cleanliness, air permeability), marking, packaging, transportation and storage, acceptance rules and methods of testing. The standard is intended for voluntary application as a national GOST where adopted.

Key topics and requirements

• Definitions and classification of feather‑and‑down semi‑fabricates and final products (types of fillers, sorting grades).
• Technical quality parameters for fillers and products: mass fraction of moisture, cleanliness, content of contaminants, fill composition and filling power expectations.
• Hygienic and chemical safety requirements (determination of free formaldehyde, limits and test references).
• Requirements for product construction, seams and closures to retain filler and ensure durability.
• Marking, labeling and packaging rules (information to the consumer, wash/care symbols and composition declarations).
• Sampling, acceptance criteria and methods of control — including gravimetric drying for moisture, air‑permeability tests, and referenced ГОСТ/ISO methods for specific properties.
• References to normative documents and test methods used to determine the listed parameters (numerous ГОСТs and ISO methods are cited in normative references).

Key technical and testing requirements are defined in clauses covering product requirements, acceptance and test procedures.

Typical use and users

Primary users are manufacturers and suppliers of feather‑and‑down bedding and soft‑furnishing products, quality and production engineers, testing laboratories, conformity assessment bodies, importers/retailers handling such products, and regulators or standards librarians maintaining national technical collections. The standard is used to set internal quality control limits, prepare technical specifications and perform laboratory testing for product acceptance and labeling.

Related standards

GOST 30332-2015 replaces ГОСТ 30332-95. It includes normative references to multiple other standards for test methods and related requirements (examples: ГОСТ ISO 3758 for care symbols, ГОСТ ISO 14184‑1/2 for formaldehyde determination, ГОСТ 3816 for hygroscopicity, ГОСТ 12088 for air‑permeability, and many more as listed in the normative references section of the standard). Several amendments/corrigenda have been issued and the standard is recorded in regional registries for CIS member states.

Keywords

feather; down; pillow; duvet; cushion; filler; semi‑finished feather product; bedding; technical requirements; marking; packaging; formaldehyde; moisture content; air permeability; test methods; ГОСТ.

FAQ

Q: What is this standard?

A: An intergovernmental (GOST) standard titled "Изделия перо‑пуховые. Общие технические условия" (GOST 30332-2015) that defines general technical requirements and test/acceptance procedures for household feather‑and‑down products.

Q: What does it cover?

A: Product definitions, filler classifications, quality and hygiene requirements, packaging and marking, sampling and acceptance rules, and referenced laboratory test methods for parameters such as moisture, cleanliness, air permeability and free formaldehyde.

Q: Who typically uses it?

A: Manufacturers of pillows, duvets and other feather/down filled products, testing laboratories, quality managers, conformity assessors, importers, retailers and regulatory bodies that reference national/regional standards.

Q: Is it current or superseded?

A: As published it is the 2015 edition and is recorded as active/in force (introduced 1 July 2016). It replaced GOST 30332-95 and later received amendments recorded in standards information bulletins. Users should check the national registry for any newer amendments or withdrawal notices before relying on it for conformity decisions.

Q: Is it part of a series?

A: It is a stand‑alone general technical specification for feather‑and‑down consumer products but references and depends on numerous other ГОСТ and ISO technical methods (care symbols, analytical test methods, textile testing standards) which together form the broader normative framework for textile/product testing.

Q: What are the key keywords?

A: Feather, down, filler, pillow, duvet, bedding, technical requirements, testing, marking, formaldehyde, moisture, air permeability, ГОСТ 30332-2015.