DIN EN 485-2 Berichtigung-1 2006-10 PDF

Full title and description

STB DIN EN 485-2 Berichtigung-1:2006-10 — Corrigendum to DIN EN 485-2 (Aluminium and aluminium alloys — Sheet, strip and plate — Part 2: Mechanical properties). This document issues corrections and clarifications to the German version of EN 485-2:2004.

Abstract

This publication is a short corrigendum (Berichtigung 1) that corrects errors, clarifies text and amends one or more tables or notes in the 2004 edition of DIN EN 485-2 (mechanical properties of wrought aluminium sheet, strip and plate). It does not introduce new scope or new test methods but provides editorial and technical corrections to the existing 2004 text.

General information

• Status: Corrigendum (Berichtigung 1); subsequently superseded/withdrawn in later editions of DIN EN 485-2 (see history below).
• Publication date: 2006-10-01 (1 October 2006).
• Publisher: Deutsches Institut für Normung (DIN) — German version of EN 485-2.
• ICS / categories: 77.150.10 (Aluminium products).
• Edition / version: Corrigendum 1 to DIN EN 485-2:2004 (2004 edition, Corrigendum issued Oct 2006).
• Number of pages: 2 (short corrigendum).

Scope

This Berichtigung (corrigendum) provides targeted corrections and editorial clarifications to DIN EN 485-2:2004, which specifies the mechanical properties required for wrought aluminium and aluminium-alloy sheet, strip and plate intended for general engineering applications. The corrigendum itself is limited in extent (two pages) and addresses errors or ambiguities in the 2004 text; it does not expand the original standard’s scope (which excludes reroll stock, many specialised products and certain specialist applications).

Key topics and requirements

• Corrections to one or more tables of mechanical properties (tensile strength, yield strength, elongation) and to related notes or footnotes.
• Editorial clarifications to temper designations and cross-references within Part 2.
• Alignment and correction of text to ensure consistency with the German language version of EN 485-2:2004.
• Does not alter test method standards referenced elsewhere; intended as an erratum/corrigendum only.

Typical use and users

Used by material specification writers, aluminium producers and processors, quality and test laboratories, procurement and engineering teams who reference EN 485-2 requirements for sheet, strip and plate. The corrigendum is mainly of interest to users who must ensure they are applying the corrected values and notes from the 2004 edition.

Related standards

Associated and commonly referenced standards include EN 485-1 (Technical conditions for inspection and delivery), EN 485-3/4 (tolerances), EN 573 (chemical composition of aluminium alloys), and EN 515 (temper designations). The EN 485 suite has later consolidated and revised editions (2007, 2009 and later) that incorporate amendments and corrections.

Keywords

aluminium; aluminium alloys; sheet; strip; plate; mechanical properties; tensile strength; yield strength; elongation; corrigendum; Berichtigung; EN 485-2; temper designation; DIN.

FAQ

Q: What is this standard?

A: It is a corrigendum (Berichtigung 1) to DIN EN 485-2:2004, issued to correct and clarify parts of the German version of EN 485-2 (Mechanical properties for aluminium sheet, strip and plate).

Q: What does it cover?

A: The corrigendum covers specific corrections and editorial clarifications to the 2004 edition of Part 2 of EN 485. It addresses errors in tables or text that affect the mechanical properties information but does not change the overall scope or introduce new test methods.

Q: Who typically uses it?

A: Aluminium manufacturers, processors, test laboratories, engineering and procurement staff, and standards/quality managers who implement or reference EN 485-2 requirements in specifications and inspection/delivery conditions use this corrigendum to ensure they apply the corrected values.

Q: Is it current or superseded?

A: The corrigendum was published on 1 October 2006 and is linked to the 2004 edition of DIN EN 485-2; later editions of EN 485-2 (for example 2007 and 2009 revisions) superseded the 2004 edition and incorporated further changes. In practice users should refer to the most recent EN 485-2 edition applicable in their jurisdiction.

Q: Is it part of a series?

A: Yes. EN 485 is a multi-part series covering aluminium and aluminium alloys — Part 1: technical conditions for inspection and delivery; Part 2: mechanical properties; Parts 3 and 4: dimensional and shape tolerances for hot- and cold-rolled products; plus related standards such as EN 573 and EN 515. The corrigendum applies specifically to Part 2 of this series.

Q: What are the key keywords?

A: Aluminium, aluminium alloys, sheet, strip, plate, mechanical properties, tensile strength, yield strength, elongation, corrigendum, Berichtigung, EN 485-2.