DIN EN ISO 13628-11 2008-09 PDF

Full title and description

STB DIN EN ISO 13628-11 2008-09 — Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications. This designation indicates the international ISO standard ISO 13628‑11:2007 (with its 2008 corrigendum) as adopted at European/DIN national level (EN / DIN) and distributed in the 2008-09 edition.

Abstract

Provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipes and flexible-pipe systems used in onshore, subsea and marine applications (both bonded and unbonded types). It covers static and dynamic flexible pipe systems used as risers, flowlines and jumpers for production, export and injection service, and specifies exclusions such as choke/kill lines and umbilicals/control lines. The ISO edition has an associated technical corrigendum issued in 2008.

General information

• Status: International standard (ISO 13628‑11:2007) with corrigendum (2008); adopted as EN / DIN national edition (DIN EN ISO 13628‑11:2008‑09). Note: ISO records indicate the ISO edition has later been withdrawn; consult your national standards body for current national adoption status.
• Publication date: ISO edition published September 2007 (ISO 13628‑11:2007); corrigendum published June 2008; DIN/EN adoption published 1 September 2008 (DIN EN ISO 13628‑11:2008‑09).
• Publisher: International Organization for Standardization (ISO); adopted/published in Europe by CEN/DIN as EN ISO / DIN EN ISO.
• ICS / categories: 75.180.10 — Equipment for oil and gas, subsea technology.
• Edition / version: Edition 1 (ISO 13628‑11:2007) with Technical Corrigendum 1 (2008); European/national edition DIN EN ISO 13628‑11:2008 (2008‑09).
• Number of pages: ISO record: 213 pages (ISO edition); published DIN/EN edition listings show 220 pages in the national PDF/printed format (format/pagination differences can occur between publishers/editions).

Scope

Sets out requirements and recommendations for flexible pipe assemblies and flexible-pipe systems for subsea and marine applications: design principles, material selection, manufacturing and assembly, testing, marking, installation and operation. Applies to both bonded and unbonded flexible pipe types and to their use as production risers, export and injection lines, flowlines and jumpers in sweet and sour service. Explicitly excludes certain small-bore or specialist lines such as choke and kill lines and umbilicals / control lines.

Key topics and requirements

• Design criteria for flexible pipe systems (static and dynamic loading, environmental loads, fatigue and erosion considerations).
• Material selection and corrosion protection guidance for subsea service (metals, non‑metals, protective systems).
• Manufacture, assembly and end-fitting requirements for flexible pipe segments and assemblies.
• Testing, inspection and marking (factory and site tests, pressure and non‑destructive examinations).
• Installation, handling and operational recommendations for risers, flowlines and jumpers (including dynamic considerations for floating systems).
• Limitations and exclusions (e.g., not intended for choke/kill lines or umbilical/control lines).

Typical use and users

Used by subsea engineers, riser and flowline designers, flexible pipe manufacturers, inspection and testing houses, offshore installation contractors, asset integrity teams and regulatory/compliance personnel within oil & gas operators and engineering contractors. It is commonly referenced alongside other subsea design standards and industry recommended practices (ISO 13628 series, API flexible-pipe guidance, national EN/DIN adoptions).

Related standards

Part of the ISO 13628 series for subsea production systems (see ISO 13628‑1, ‑2, ‑7, ‑10, etc.) and is referenced by and used together with industry documents such as API RP 17B (flexible pipe practice) and national/adopted EN/DIN versions and corrigenda. Users should consult adjacent parts of ISO 13628 for system-level requirements and other API/CEN documents for complementary guidance.

Keywords

Flexible pipe, flexible-pipe systems, subsea riser, flowline, jumper, flexible riser, bonded flexible pipe, unbonded flexible pipe, subsea production systems, riser installation, flexible pipe testing, ISO 13628

FAQ

Q: What is this standard?

A: An ISO standard (ISO 13628‑11:2007, with technical corrigendum 2008) that gives guidance and requirements for flexible pipe assemblies and systems used in subsea and marine oil & gas applications; it was adopted as EN / DIN national editions (DIN EN ISO 13628‑11:2008‑09).

Q: What does it cover?

A: Design, material selection, manufacture, testing, marking, installation and operation of bonded and unbonded flexible pipes and flexible‑pipe systems used as risers, flowlines, jumpers and similar subsea/marine applications; it excludes choke/kill lines and umbilicals/control lines.

Q: Who typically uses it?

A: Subsea/riser designers, flexible-pipe manufacturers, offshore installation contractors, integrity and operations teams at oil & gas operators, and conformity/standards teams in engineering firms. It is used where flexible pipe design and operation decisions are made.

Q: Is it current or superseded?

A: The ISO record shows the 2007 edition and its corrigendum (2008); ISO metadata indicates later lifecycle changes (including withdrawal stages recorded by ISO). National/adopted EN/DIN copies may remain in force or be superseded locally — always check your national standards body or publisher for the current legal/adopted status and any newer replacements.

Q: Is it part of a series?

A: Yes — ISO 13628 is a multipart series covering design and operation of subsea production systems (examples: ISO 13628‑1, ‑2, ‑7, ‑10, etc.); Part 11 focuses specifically on flexible-pipe systems.

Q: What are the key keywords?

A: Flexible pipe, riser, flowline, jumper, bonded/unbonded flexible pipe, subsea production, flexible-pipe testing, material selection, installation, ISO 13628.