SHNK 1.02.08-19 PDF

Full title and description

SHNK 1.02.08-19 — "Geodetic engineering surveys for construction. Set of rules". Official edition prepared for application in construction practice; contains requirements and procedures for planning, execution, processing and acceptance of engineering-geodetic (surveying) works for design and construction projects.

Abstract

This document is a consolidated set of rules for engineering geodetic (surveying) investigations executed for construction purposes. It covers the composition of surveys, required accuracy and density of control networks, methods for topographic and cadastral surveys, use of GNSS and photogrammetric techniques, levelling and height control, surveying of underground and above-ground utilities, stakeout (setting out) procedures, quality control, documentation and acceptance of survey results. The standard is intended to harmonize survey practice for design, construction and as-built documentation.

General information

• Status: Active / Official national set of rules (in force).
• Publication date: 2019 (edition year shown in the document identifier).
• Publisher: Ministry of Construction of the Republic of Uzbekistan (official edition, Tashkent).
• ICS / categories: Astronomy. Geodesy. Geography — ICS 07.040 (geodesy and surveying-related classification).
• Edition / version: 2019 official edition (identifier 1.02.08-19).
• Number of pages: Approximately 145–147 pages depending on source/format (published editions and vendor listings report 145 or 147 pages).

Scope

Applies to planning, execution, processing and acceptance of engineering-geodetic surveys carried out for design and construction of buildings, linear and infrastructure projects within the jurisdiction of the issuing authority. The rules address required survey types and deliverables for pre-design, design-stage and construction-stage works, including surveys for topographic mapping, geodetic control networks, stakeout, monitoring and documentation of engineering works.

Key topics and requirements

• Definition of survey composition for different project stages (pre-design, design, construction, as-built).
• Requirements for geodetic control networks: classes, densities and allowable closure errors.
• Standards for topographic survey scales and contouring (typical scales 1:5000 — 1:500 and larger for detailed works).
• Use of GNSS/satellite methods, photogrammetry and total station techniques—requirements for planning, control and verification.
• Levelling and height control methods and allowable tolerances.
• Surveying and mapping of underground and overhead utilities; requirements for coordinate/tie-in of network elements.
• Stakeout (setting out) procedures, tolerances for construction positioning and verification methods.
• Data processing, quality control, documentation formats, reporting and acceptance procedures for survey results.

Typical use and users

Primary users are engineering-survey organizations, cadastral and geodetic services, design institutes, construction contractors, site engineers and project managers who need to plan, perform and accept geodetic/survey works for construction projects. Regulators and technical reviewers use the rules to verify compliance of survey deliverables.

Related standards

This set of rules consolidates and replaces several earlier national survey rules (earlier SHNK documents and related regional guidance). Individual SHNK documents such as SHNK 1.02.19-09 and earlier 1.02.08-09 / 1.02.17-09 have been superseded or integrated into the 1.02.08-19 rules in the course of the 2019 consolidation. For geodetic instrument, terminology and international interoperability guidance, users commonly refer alongside relevant ISO standards on geospatial and surveying practice.

Keywords

engineering geodetic surveys; surveying for construction; topographic survey; geodetic control network; GNSS; levelling; stakeout; survey tolerances; survey documentation; SHNK 1.02.08-19

FAQ

Q: What is this standard?

A: SHNK 1.02.08-19 is an official set of rules for engineering-geodetic (surveying) investigations used in construction practice; it specifies the scope, methods, accuracy requirements and deliverables for survey works.

Q: What does it cover?

A: It covers planning and execution of geodetic control networks, topographic and utility surveys, GNSS and photogrammetric techniques, levelling, stakeout procedures, quality control and documentation/acceptance of survey results for design and construction.

Q: Who typically uses it?

A: Survey companies, design institutes, construction contractors, site engineers, cadastral and geodetic authorities, and technical reviewers responsible for ensuring survey work meets regulatory and project requirements.

Q: Is it current or superseded?

A: The 2019 edition (identifier "-19") is the current consolidated set of rules that replaced earlier SHNK documents (older 2009 versions and related SHNK items). Users should confirm applicability in their jurisdiction and check for any later amendments.

Q: Is it part of a series?

A: Yes — it is published within the SHNK series (national building/construction rules) covering different types of investigations and design disciplines (other SHNK titles cover geotechnical, topographic mapping, design documentation, etc.).

Q: What are the key keywords?

A: Geodetic surveys; topographic mapping; GNSS; levelling; geodetic control; stakeout; survey tolerances; survey documentation; engineering surveys; construction surveys.