ISO 6365-1-1988 PDF

Full title and description

Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery. This part specifies the technical conditions for inspection and delivery of cold-drawn wrought aluminium and aluminium-alloy wire intended for general engineering applications (not electrical wire), including requirements for manufacture, inspection, marking and testing.

Abstract

This part of ISO 6365 covers technical delivery and inspection requirements for wrought aluminium and aluminium-alloy cold-drawn wire for general engineering use. It sets out requirements relating to manufacturing and quality control, chemical composition, mechanical properties, surface finish, dimensional and form tolerances, conformity criteria, marking, packing and methods of test (including retests and arbitration tests). It does not apply to electrical wire.

General information

• Status: Withdrawn.
• Publication date: December 1988 (Edition 1, 1988-12).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 77.150.10 (Wrought aluminium and aluminium alloys).
• Edition / version: Edition 1 (1988).
• Number of pages: 2.

Key bibliographic and status details above are recorded in the ISO catalogue and standard distribution sources.

Scope

Specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium-alloy wire drawn cold for general engineering applications. The standard addresses requirements for production and quality control, chemical composition limits, mechanical properties, surface finish, dimensional and form tolerances, conformity with referenced standards, marking and packing, and prescribes methods of test, retest and arbitration. The standard explicitly excludes electrical wire from its scope.

Key topics and requirements

• Definitions and product designation for cold-drawn wrought aluminium and aluminium-alloy wire.
• Manufacturing and quality-control requirements to ensure conformity at delivery.
• Chemical-composition limits and specification of alloy grades where applicable.
• Mechanical-property requirements (tensile properties) appropriate for the product class.
• Surface finish criteria and acceptance/rejection rules for visible defects.
• Dimensional and form tolerances (diameter, roundness, straightness and length as applicable).
• Marking, packing and documentation to accompany deliveries.
• Specified test methods, procedures for retests and arbitration tests for dispute resolution.

Typical use and users

Used by manufacturers of cold-drawn wrought aluminium and aluminium-alloy wire, quality and production engineers, procurement and inspection personnel, testing laboratories, and standards bodies when specifying, procuring or verifying general-purpose aluminium wire for engineering applications (excluding electrical conductor applications). It is referenced for product acceptance criteria and supplier contracts.

Related standards

ISO 6365-1:1988 was issued as part of the ISO 6365 series for cold-drawn wrought aluminium wire and has been withdrawn; the work has since been revised and newer related documents cover similar subjects. ISO records indicate this part has been superseded in the ISO catalogue by later standards in the field (for example, replacement/revision activity is reflected by ISO 6363-1:2012 and other related documents). The standard also superseded earlier national or ISO documents such as ISO 5191 in its historical lineage. Consult current ISO catalogues for the active normative references to use in new specifications.

Keywords

aluminium, aluminium alloy, cold-drawn wire, wrought wire, inspection, delivery, technical conditions, mechanical properties, chemical composition, dimensional tolerances, surface finish, marking, packing, test methods.

FAQ

Q: What is this standard?

A: ISO 6365-1:1988 is an ISO International Standard titled "Wrought aluminium and aluminium alloy cold-drawn wire — Part 1: Technical conditions for inspection and delivery" that defines delivery and inspection requirements for cold-drawn aluminium wire for general engineering use.

Q: What does it cover?

A: It covers manufacturing and quality-control requirements, chemical composition, mechanical properties, surface finish, dimensional and form tolerances, conformity criteria, marking, packing and methods of testing (including procedures for retest and arbitration). It excludes electrical wire.

Q: Who typically uses it?

A: Manufacturers, quality/production engineers, procurement and inspection teams, testing laboratories and standards administrators involved with general-purpose cold-drawn aluminium wire.

Q: Is it current or superseded?

A: ISO 6365-1:1988 has been withdrawn. ISO catalogue entries and standards distributors note it is withdrawn and that later ISO work (including documents such as ISO 6363-1:2012 and other related standards) now cover revised requirements; users should consult the current ISO catalogue to identify the active replacement or relevant current standards.

Q: Is it part of a series?

A: Yes — it was published as Part 1 of the ISO 6365 series on wrought aluminium and aluminium-alloy cold-drawn wire; other parts in the series address mechanical properties, dimensional and form tolerances, and specific product types. Check the ISO catalogue for the status of the other parts.

Q: What are the key keywords?

A: Aluminium, aluminium alloy, cold-drawn wire, inspection, delivery, tensile properties, chemical composition, dimensional tolerances, surface finish, marking, test methods.