ISO 8132-2022 PDF

Full title and description

ISO 8132:2022 — Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. The standard specifies dimensional requirements to ensure interchangeability of accessories (rod clevises, rod flanges, clevis brackets, trunnion brackets, pivot pins, rod eyes, etc.) intended for use with cylinders manufactured to ISO 6020‑1 and ISO 6022.

Abstract

This International Standard defines the mounting dimensions required for the interchangeability of accessories for the 16 MPa (160 bar) medium series and the 25 MPa (250 bar) series of single‑rod hydraulic cylinders. It covers only dimensional criteria (not functional characteristics) and identifies accessories using the ISO 6099 classification.

General information

• Status: Published.
• Publication date: April 2022 (official publication listed in April 2022; published 27 April 2022 in some national catalogues).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 23.100.20 (Hydraulic and pneumatic systems).
• Edition / version: Edition 4 (2022).
• Number of pages: 14 pages (ISO edition).

Scope

Specifies mounting dimensions for accessories intended for single‑rod hydraulic cylinders of the 16 MPa (160 bar) medium series (cylinders to ISO 6020‑1) and the 25 MPa (250 bar) series (cylinders to ISO 6022). The document lists accessory types by ISO 6099 identifiers (for example AP2 rod clevis, AF3 rod flange, AB3/AB4 clevis brackets, AT4 trunnion bracket, AA/AA6 pivot pins, AP4/AP6 rod eyes) and applies only to dimensional interchangeability — it does not set performance or material requirements.

Key topics and requirements

• Standardized mounting dimensions for accessories used with 16 MPa and 25 MPa single‑rod cylinders to ensure mechanical interchangeability.
• Identification of accessory types using ISO 6099 designations (AP2, AF3, AB3/AB4, AT4, AA4/AA6, AP4/AP6, etc.).
• Dimensional tables and figures specifying critical mounting interfaces (clevis/eye/trunnion dimensions, pin diameters, thread sizes where applicable).
• Applicability limited to dimensional criteria; functional performance, materials and testing are outside the scope.
• Reference to related cylinder standards (ISO 6020‑1 and ISO 6022) as the dimensional basis for accessory design.

Typical use and users

Used by hydraulic component and cylinder manufacturers, mechanical designers and engineers, OEMs, procurement/specification teams, and standards committees to ensure accessory interchangeability and consistent mating dimensions. It is also consulted by technical documentation authors and by testing/inspection personnel responsible for dimensional verification.

Related standards

Commonly referenced standards include ISO 6020‑1 (single‑rod cylinders — medium series), ISO 6022 (single‑rod cylinders — 25 MPa series), ISO 6099 (accessory identification and classification), and other hydraulic standards covering cylinder loads and dimensions such as ISO 3320 and ISO 2944. A closely related document is ISO 8133:2022 (mounting dimensions for accessories for compact series cylinders). Earlier editions of ISO 8132 (2006, 2014) were withdrawn and superseded by the 2022 edition.

Keywords

Hydraulic fluid power; single‑rod cylinder; mounting dimensions; accessories; interchangeability; clevis; trunnion; rod eye; pivot pin; ISO 6020‑1; ISO 6022; ISO 6099.

FAQ

Q: What is this standard?

A: ISO 8132:2022 is an international standard that specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa (160 bar) medium series and 25 MPa (250 bar) single‑rod hydraulic cylinders.

Q: What does it cover?

A: It covers only dimensional criteria (figures and tables specifying mounting interfaces and accessory dimensions) for identified accessory types; it does not cover functional performance, material selection or testing.

Q: Who typically uses it?

A: Cylinder and accessory manufacturers, mechanical designers, OEM engineers, procurement/specification teams, and inspection personnel use this standard to ensure parts from different suppliers will mechanically mate.

Q: Is it current or superseded?

A: Current — ISO 8132:2022 is the active edition (Edition 4, published in April 2022) and supersedes earlier editions (for example ISO 8132:2014).

Q: Is it part of a series?

A: It is part of a family of ISO standards covering hydraulic cylinder accessories and dimensions (for example ISO 8133:2022 for compact series accessories) and is intended to work with cylinder standards such as ISO 6020‑1 and ISO 6022.

Q: What are the key keywords?

A: Key keywords include hydraulic fluid power, mounting dimensions, accessories, single‑rod cylinder, interchangeability, clevis, rod eye, pivot pin, trunnion, ISO 6020‑1, ISO 6022, ISO 6099.