BS EN 1501-2-2021 PDF

Full title and description

STB BS EN 1501-2:2021 — Refuse collection vehicles — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles. This European/CEN standard (adopted as a British Standard) specifies general and safety requirements for the design, construction and safe operation of side‑loaded refuse collection vehicles (side‑loader RCVs), including truck‑mounted compactors used for collection, to reduce risks during intended use and foreseeable misuse over the vehicle’s service life.

Abstract

EN 1501-2:2021 identifies significant hazards, hazardous situations and events relevant to side‑loaded refuse collection vehicles and defines requirements (design, guarding, controls, warnings, stability, maintenance, verification and information for use) to ensure vehicles are safe, operable, maintainable and cleanable. The document excludes end‑of‑life aspects and certain operational/environmental extremes, and it updates and replaces the previous EN 1501-2:2005/A1:2009 edition.

General information

• Status: Current / Active (BS adoption; European Standard EN 1501-2:2021).
• Publication date: 8 April 2021 (BS adoption / April–May 2021 national publications).
• Publisher: CEN (European Committee for Standardization) — adopted and published nationally (e.g., BSI as BS EN 1501-2:2021; DIN, UNI, etc.).
• ICS / categories: 43.160 — Special purpose vehicles (waste collection / public service vehicles).
• Edition / version: 2021 (replaces EN 1501-2:2005+A1:2009).
• Number of pages: ~68 pages (national publications vary 65–70 pages depending on national forewords/translations).

Summary details above consolidated from national publication records and standard catalogues.

Scope

This part of EN 1501 applies to the design and construction of side‑loaded refuse collection vehicles used for the collection, transport and unloading of solid wastes. It covers significant hazards and reasonably foreseeable misuse during normal use and maintenance throughout the vehicle’s working life (excluding end‑of‑life). The standard does not cover lifting devices, loader cranes or the interface to lifting devices (see prEN 1501‑5 and EN 12999); it is not intended for operation below −25 °C or above +40 °C, for tropical/corrosive/contaminating environments, wind speeds over ~75 km/h, explosive atmospheres, shipboard operation or for hazardous loads such as radioactive or very hot refuse.

Key topics and requirements

• Identification and assessment of significant hazards for side‑loaded RCVs (crushing, trapping, entanglement, ejection, overturning, fire risk, etc.).
• Design requirements for access, guarding and protective devices to prevent contact with moving parts and danger zones.
• Requirements for controls, remote controls, monitoring, warnings and operator interfaces (including revisions to remote control and monitoring requirements in the 2021 edition).
• Stability, braking and vehicle‑handling considerations specific to side loaders.
• Verification, testing and information for use (marking, operator instructions, maintenance documentation and safety information).
• No coverage for certain auxiliary lifting interfaces (these are handled in related parts / standards such as EN 12999 and forthcoming parts of EN 1501 series).

Many of these topics were updated or expanded in the 2021 edition (new/updated clauses, revised tables of danger zones, new annexes such as illuminated areas, and updated verification/annex ZA text relating to EU Machinery requirements).

Typical use and users

Primary users: manufacturers and designers of refuse collection vehicles, vehicle system integrators, fleet operators, safety and compliance engineers, conformity assessment bodies, national standardization bodies and procurement authorities. The standard is also used by risk assessors, maintenance organizations, training providers and regulators to specify and verify safe design, operation and servicing practices for side‑loader RCVs.

Related standards

EN 1501 is a multi‑part series — related parts include EN 1501‑1 (rear loaded), EN 1501‑3 (front loaded) and other parts under development (e.g., prEN 1501‑5 addressing lifting device interfaces). EN 1501‑2 interacts with vehicle/loader interface standards such as EN 12999 and with general machinery safety standards and EU Machinery Directive/Regulation conformity texts (Annex ZA / harmonization references). Referenced national adoptions (BSI, DIN, UNI, UNE, etc.) publish the identical EN text with national forewords.

Keywords

Refuse collection vehicle; RCV; side loader; side‑loaded refuse collection vehicle; safety requirements; vehicle design; guarding; operator controls; stability; verification; maintenance; EN 1501; BS EN 1501‑2:2021.

FAQ

Q: What is this standard?

A: EN 1501‑2:2021 (adopted as BS EN 1501‑2:2021) is the European standard that defines general and safety requirements specifically for side‑loaded refuse collection vehicles. It sets out hazard lists, design and verification requirements and information for use to reduce risks associated with these vehicles.

Q: What does it cover?

A: It covers significant hazards, hazardous situations and events relevant to side‑loader RCVs during intended use and foreseeable misuse — including requirements for guarding, controls, monitoring, stability, warnings, maintenance instructions and verification/testing. It excludes certain interfaces (lifting devices/loader cranes), extreme environmental/temperature conditions and end‑of‑life aspects.

Q: Who typically uses it?

A: Vehicle OEMs, bodybuilders, fleet owners, safety/compliance engineers, conformity assessment bodies, maintenance and training organizations, and public procurement or regulatory authorities use the standard to specify, design, verify and operate side‑loaded refuse collection vehicles.

Q: Is it current or superseded?

A: EN 1501‑2:2021 is the current edition (published 2021) and it supersedes EN 1501‑2:2005+A1:2009. National adoptions (e.g., BS EN 1501‑2:2021, DIN EN 1501‑2:2021) reflect the 2021 text. Updates and future parts (e.g., prEN 1501‑5) are in development or enquiry.

Q: Is it part of a series?

A: Yes — EN 1501 is a multipart series covering refuse collection vehicles; part 1 covers rear loaded vehicles, part 2 covers side loaded vehicles (this part), part 3 covers front loaded vehicles and additional parts address interfaces and other specific topics. The series is maintained by CEN/TC 183 (Waste management).

Q: What are the key keywords?

A: Side loader, refuse collection vehicle, RCV, safety requirements, guarding, operator controls, stability, maintenance, EN 1501‑2:2021.