ASTM E1512-01 (2023) PDF

Full title and description

ASTM E1512-01(2023) — Standard Test Methods for Testing Bond Performance of Bonded Anchors. Specifies standard laboratory test methods for evaluating the bond performance of bonded (adhesive/chemical) anchors installed in concrete and masonry, including specimen preparation, installation, curing, and reporting requirements for comparative and qualification testing.

Abstract

This standard provides test procedures to determine the bond performance of bonded anchors under controlled laboratory conditions. It covers installation and curing of anchors, test specimen geometry, static and dynamic loading arrangements (restrained and unrestrained tests), and required test-data reporting so that adhesive anchor systems can be compared and qualified for use in construction applications. The methods are intended to support product qualification, research, and conformity evaluation.

General information

• Status: Active / Current (reapproved/issued edition).
• Publication date: 01 December 2023.
• Publisher: ASTM International.
• ICS / categories: 21.060.99 (Other fasteners); keywords include adhesive anchors, chemical anchoring systems, concrete, masonry.
• Edition / version: E1512-01(2023) — reapproval/republication of the E1512 test methods (original designation E1512‑01).
• Number of pages: 5 pages (concise test-method specification).

Scope

Defines laboratory test methods to measure bond performance of bonded anchors (adhesive/chemical systems) in representative concrete and masonry test members. The scope includes specimen configuration, installation and curing per manufacturer instructions (or as specified), static and dynamic test arrangements (restrained and unrestrained), and required test-report content. These methods are intended for product qualification, comparative testing, and research rather than direct on-site acceptance procedures.

Key topics and requirements

• Preparation of test specimens (concrete/masonry member dimensions and embedment depths).
• Anchor installation and curing protocols, including manufacturer-directed procedures and laboratory-controlled temperature conditions.
• Static bond tests (tension and shear) and arrangements for restrained vs. unrestrained testing.
• Dynamic and cyclic test options where applicable (to simulate service or seismic effects).
• Verification of adhesive material properties and documentation of installation variables (hole cleaning, drill method, temperature, cure time).
• Reporting requirements: test setup, specimen data, measured bond stresses, failure modes, and deviations from standard procedures.
• Cross-reference to related ASTM test methods used in anchor qualification (for example, Test Methods E488/E488M for tension/shear test arrangements).

Typical use and users

Used by product manufacturers, independent testing laboratories, qualification and research teams, structural and geotechnical engineers, building code committees, and approval authorities to qualify adhesive anchor systems, compare product performance, and develop installation/quality-control specifications. The standard supports procedures used in broader qualification documents such as ACI and code-related evaluation protocols.

Related standards

Commonly referenced and complementary documents include ASTM Test Methods E488/E488M (tension and shear testing of anchors), ACI qualification guides and acceptance criteria for post‑installed anchors (for example ACI 355 series and ACI 355.4 for adhesive anchors), and regional design/assessment documents (EN/ETAG/EAD guidance for anchor qualification). These documents are often used together when qualifying anchors for seismic, sustained, or service-condition applications.

Keywords

ASTM E1512, bonded anchors, adhesive anchors, chemical anchors, bond performance, anchor testing, concrete anchors, masonry anchors, anchor qualification, E488, ACI 355, test methods.

FAQ

Q: What is this standard?

A: ASTM E1512-01(2023) is a concise set of laboratory test methods for measuring the bond performance of bonded (adhesive/chemical) anchors installed in concrete and masonry.

Q: What does it cover?

A: It covers specimen preparation, anchor installation and curing, static and (where applicable) dynamic/cyclic test arrangements, measurement and reporting of bond performance, and related test procedures for comparative and qualification testing.

Q: Who typically uses it?

A: Anchor manufacturers, independent testing laboratories, structural engineers, building code/approval bodies, and researchers use the standard for product qualification, performance comparison, and test method development.

Q: Is it current or superseded?

A: The edition designated E1512-01(2023) is the reapproved/issued form published 01 December 2023 and is the current published edition. Earlier editions include the original E1512‑01 and later reapprovals/revisions (for example versions noted in 2007 and 2015 history).

Q: Is it part of a series?

A: E1512 is part of the body of ASTM test methods used for anchor performance and qualification; it is commonly used alongside ASTM E488/E488M and with qualification/acceptance standards such as ACI 355.x and other regional anchor-assessment documents.

Q: What are the key keywords?

A: Adhesive anchors, bonded anchors, chemical anchoring systems, bond strength, concrete, masonry, test methods, anchor qualification.