ASTM RR-F02-1023 2006 PDF

Full title and description

St ASTM RR-F02-1023 2006 — Research Report RR:F02-1023 titled "F0088/F0088M — Test Method for Seal Strength of Flexible Barrier Materials". The report documents an interlaboratory study conducted to establish the precision and bias statement for ASTM test method F0088/F0088M.

Abstract

This research report (RR:F02-1023), approved July 10, 2006, summarizes an interlaboratory study carried out by eighteen laboratories that tested three material combinations across a series of specimen preparation and test techniques to develop the precision statement supporting Test Method F0088/F0088M (seal strength of flexible barrier materials). The report provides raw data, statistical summaries, and the resulting precision and bias information used in the F88/F88M standard.

General information

• Status: Research Report — approved (interlaboratory study report supporting ASTM Test Method F0088/F0088M).
• Publication date: Research Report approved July 10, 2006.
• Publisher: ASTM International (store and standards program).
• ICS / categories: Packaging and packaging materials (ICS codes used for related F88 standards include entries in the 55.040–55.080 range).
• Edition / version: Research Report RR:F02-1023 (2006) supporting the F0088/F0088M test method; the test method itself has subsequent revisions (see F88/F88M editions such as F88/F88M-15 and F88/F88M-23).
• Number of pages: Not specified on the ASTM research-report listing (ASTM store page lists the report and format but does not display a page count).

Scope

The report supports the scope of Test Method F0088/F0088M: measurement of the strength of seals in flexible barrier materials (including flexible-to-flexible and flexible-to-rigid/semi-rigid seals). The test measures the force required to separate a test strip containing the seal and identifies the mode of specimen failure; results are used for process validation, process control, and capability assessment. The research report supplies the interlaboratory precision data that underpin the test method's precision and bias statements.

Key topics and requirements

• Interlaboratory study methodology and statistical analysis to establish precision and bias for F0088/F0088M.
• Test specimen preparation and dimensional requirements for seal strips.
• Test techniques and fixtures (Technique A: unsupported; Technique B: supported 90°; Technique C: supported 180°) to control bending components of measured force.
• Reporting of maximum (peak) seal force and, where appropriate, average peel force and mode of failure.
• Use of SI or inch‑pound units (both systems treated independently in the standard).

Typical use and users

Packaging engineers, quality-control and materials testing laboratories, medical device packagers, flexible film and laminate manufacturers, and regulatory/test laboratories use F88/F88M and the supporting research report for validating sealing processes, setting acceptance criteria, and demonstrating repeatability and reproducibility of seal-strength measurements. The document is produced under ASTM Committee F02 (Primary Barrier Packaging) practices.

Related standards

Related ASTM standards and test methods from Committee F02 include other package-seal and leak-detection methods (for example, F2054 — burst testing of flexible package seals; F2338 — vacuum decay leak detection; F2824 — mechanical seal strength testing for round cups and peelable lids; F1921 — hot seal strength/hot tack). The RR:F02 series lists multiple related research reports for packaging test methods.

Keywords

seal strength, F88, F0088/F0088M, flexible barrier materials, peel test, interlaboratory study, precision and bias, primary barrier packaging, ASTM F02.

FAQ

Q: What is this standard?

A: It is a research report (RR:F02-1023) produced by ASTM to document an interlaboratory study that supports Test Method F0088/F0088M (commonly referred to as ASTM F88/F88M), "Standard Test Method for Seal Strength of Flexible Barrier Materials." The report was approved July 10, 2006.

Q: What does it cover?

A: The report documents testing across multiple laboratories and techniques to establish the precision and bias statements for the seal-strength test method. The associated test method covers measuring the force required to separate seals in flexible barrier materials and identifying failure modes, with guidance on fixtures and techniques to control measurement artifacts.

Q: Who typically uses it?

A: Packaging and materials engineers, QC/test laboratories, film and laminate manufacturers, medical device packaging groups, and anyone responsible for validating or controlling seal quality in flexible packaging.

Q: Is it current or superseded?

A: The research report is the 2006 interlaboratory study (RR:F02-1023) and remains the documented precision work for the F0088/F0088M method at that time. The F88/F88M test method itself has been revised since 2006 (multiple editions exist, including more recent revisions such as F88/F88M-15 and F88/F88M-23); users should refer to the latest F88/F88M edition for current test-method text while the RR remains the historical precision study.

Q: Is it part of a series?

A: Yes — RR:F02-1023 is one report in ASTM's RR:F02 series of research reports produced by Committee F02 (Primary Barrier Packaging); the RR:F02 series documents interlaboratory studies and precision statements for many F02 test methods.

Q: What are the key keywords?

A: Seal strength, peel test, flexible barrier materials, interlaboratory study, precision and bias, ASTM F88/F0088, primary barrier packaging.