GOST 9128-2013 PDF

Full title and description

GOST 9128-2013 — "Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications". The standard sets technical requirements for production, composition and properties of hot and cold asphaltic concrete mixtures and polymer‑modified asphalt concretes intended for road and airfield pavement layers.

Abstract

GOST 9128-2013 establishes terminology, classification, composition limits (mineral fraction and bituminous binders), requirements for polymer‑bitumen binders (including SBS-type block copolymer modifiers), methods of sampling and basic test requirements, and rules for production and acceptance of asphaltic and polymer‑modified asphalt concrete mixtures for roads and aerodromes. It replaces the 2009 edition and provides updated technical conditions for mixtures that use polymer-bitumen binders.

General information

• Status: Partially in force / in use for pavement materials; document published and approved in 2013 (some provisions have been referenced or updated by later national standards and technical documents).
• Publication date: Approved 17 December 2013 (document issued in 2013/2014 editions).
• Publisher: Federal Agency for Technical Regulation and Metrology (Rosstandart) — national GOST publication/registry (electronic publication).
• ICS / categories: 93.080 (Road engineering) — specifically 93.080.20 (road construction materials).
• Edition / version: Designation GOST 9128-2013 (edition replacing GOST 9128-2009).
• Number of pages: Typical commercial copies list 55 pages.

Scope

This standard applies to asphaltic concrete mixtures and asphaltic concrete — including polymer‑modified asphaltic concrete mixtures made with polymer‑bitumen binders (for example SBS‑modified binders) — used for wearing and base layers of automobile roads and for aerodrome pavements. It defines types of mixtures (hot and cold, dense and porous), limits for mineral composition and binder content, and acceptance/testing requirements for production and supplied mixtures.

Key topics and requirements

• Classification of asphaltic and polymer‑asphalt mixtures by type, density and intended pavement layer (wearing, base, etc.).
• Requirements for mineral aggregate grading (continuous and gap‑graded compositions) and permissible fractions for different mixture types.
• Specifications for polymer‑bitumen binders (emphasis on SBS-type block copolymer modifiers) and their selection for different mixture grades.
• Production parameters (mixing and laying temperatures, compaction recommendations) for hot and cold mixes.
• Sampling, test methods and acceptance rules for delivered mixtures and compacted asphalt concrete (basic laboratory checks and performance indicators).

Typical use and users

Used by road and airport pavement designers, asphalt mix designers, material and quality control laboratories, pavement contractors, road authorities and regulatory bodies. Typical applications include specification and acceptance of hot‑mix asphalt and polymer‑modified asphalt mixtures for wearing courses, binder courses and airfield pavements.

Related standards

Documents commonly referenced together with or replacing parts of GOST 9128-2013 include earlier GOST 9128-2009, national GOST R standards on polymer‑bitumen binders and mineral powders (for example GOST R 52056-2003 and GOST R 52129-2003), and more recent GOST/GOST R series dealing with asphalt test methods and recycled asphalt guidance (examples noted in national bibliographies and commentary). Users should consult the current Rosstandart registry for the latest cross‑references and any superseding normative documents.

Keywords

asphaltic concrete; polymer asphalt concrete; polymer‑bitumen binder; SBS; roadway pavements; airfield pavements; aggregate gradation; hot‑mix asphalt; cold‑mix asphalt; specifications.

FAQ

Q: What is this standard?

A: GOST 9128-2013 is a Russian national standard specifying technical conditions for asphaltic concrete and polymer‑modified asphaltic concrete mixtures used on roads and aerodromes, including composition, binder requirements and basic acceptance/testing rules.

Q: What does it cover?

A: It covers types of mixtures (hot and cold), mineral aggregate grading, binder (including polymer‑bitumen) requirements, production and laying parameters, sampling and laboratory tests, and acceptance criteria for mixtures and compacted asphalt concrete.

Q: Who typically uses it?

A: Pavement engineers, asphalt mix designers, road and airport contractors, materials laboratories, procurement/acceptance inspectors and regulatory authorities responsible for pavement materials and construction quality.

Q: Is it current or superseded?

A: GOST 9128-2013 replaced the 2009 edition; parts of its application and references may have been updated by later GOST/GOST R documents. Status annotations in national databases show it in use but note cross‑references and partial updates — users should verify applicability and any more recent regional/national amendments before relying on it for specific projects. (Information checked against national document registries and standards indexes.)

Q: Is it part of a series?

A: Yes — it is part of the family of road and pavement standards (ICS 93.080) and is frequently used together with related GOST and GOST R standards covering bituminous binders, mineral powders, asphalt test methods and pavement design/maintenance rules.

Q: What are the key keywords?

A: Asphaltic concrete; polymer asphalt concrete; polymer‑bitumen binders; SBS; aggregate grading; road pavements; aerodrome pavements; hot‑mix; cold‑mix.