RD 03-614-03 PDF

Full title and description

RD 03-614-03 — "Procedure for the use of welding equipment in the manufacture, installation, repair and reconstruction of technical devices for hazardous production facilities." This regulatory document establishes mandatory procedural requirements and attestation rules for selection, operation, inspection and certification of welding equipment used on hazardous industrial installations (approved by Gosgortekhnadzor, document dated 19 June 2003; introduced into force by implementing order in 2004).

Abstract

RD 03-614-03 sets out safety-oriented procedures and technical requirements for applying welding equipment when fabricating, assembling, repairing or reconstructing technological devices that form part of hazardous production facilities. It covers equipment attestation, operator qualification input, inspection and testing regimes, documentation and recordkeeping necessary to demonstrate safe, certified use of welding assets on regulated sites.

General information

• Status: Active (in-force as a Gosgortekhnadzor regulatory procedure).
• Publication date: Adopted 19 June 2003 (Gosgortekhnadzor Resolution No. 102); introduced into force by subsequent order in January 2004.
• Publisher: Gosgortekhnadzor (State Mine Engineering Inspectorate of the Russian Federation) / regulatory publication of the Russian supervisory authority.
• ICS / categories: Welding and joining technology; industrial safety for hazardous production facilities; equipment attestation and certification; regulatory procedure (Russian national/regulatory document).
• Edition / version: Original issue 2003 (document number RD 03-614-03); introduced into force (implementation order) 2004. Where regional or agency updates exist, users should check the relevant regulator for later amendments.
• Number of pages: Approximately 32 pages (typical published PDF formats).

Scope

Applies to the selection, commissioning, operation, inspection, testing, attestation and maintenance of welding equipment and associated welding consumables when used for manufacture, installation, repair and reconstruction of technological devices at hazardous production facilities within the jurisdiction of the issuing authority. The document is intended to ensure that welding operations on safety‑critical equipment are performed with certified tools, competent personnel and traceable documentation so as to reduce risk to people, property and the environment.

Key topics and requirements

• Definitions and scope of application for welding equipment on hazardous production sites.
• Requirements for attestation (certification) of welding equipment before use on regulated facilities.
• Criteria for periodic inspection, preventive maintenance and performance testing of welding machines and ancillary systems.
• Documentation, marking and recordkeeping obligations for equipment, repairs and test results.
• Qualification and periodic certification of personnel operating welding equipment; linkage with welding technology approval.
• Safety measures, protective equipment and procedural controls to mitigate hazards during welding operations on hazardous equipment.
• Non‑destructive testing (NDT) and acceptance criteria for welded components on safety‑critical systems.
• Responsibilities of owners, contractors and certification bodies with respect to attestation and compliance.

Typical use and users

Used by regulatory and supervisory authorities, facility operators of hazardous production sites (for example, chemical plants, refineries, mining and heavy industry), health & safety engineers, welding coordinators, quality assurance managers, certification and testing laboratories, and contractors performing fabrication, repair or reconstruction work on safety-critical process equipment.

Related standards

Commonly referenced alongside other Russian procedural and safety documents for welding and hazardous facilities, including RD 03-613-03 and RD 03-615-03, and related safety provisions such as PB 03-273-99. It is also used in the context of national attestation frameworks and with complementary international standards (for example, EN/ISO welding quality and NDT norms) where applicable.

Keywords

RD 03-614-03, welding equipment, attestation, certification, hazardous production facilities, Gosgortekhnadzor, welding safety, inspection, non-destructive testing, equipment maintenance, operator qualification.

FAQ

Q: What is this standard?

A: RD 03-614-03 is a Russian regulatory procedure that defines how welding equipment must be selected, attested, operated and inspected when used on the manufacture, installation, repair and reconstruction of technological devices for hazardous production facilities.

Q: What does it cover?

A: It covers procedural and technical requirements for equipment attestation, periodic inspection, documentation and operator qualification as part of ensuring safe welding practice on safety-critical installations.

Q: Who typically uses it?

A: Regulators, facility owners/operators of hazardous sites, HSE and QA professionals, welding coordinators, certification bodies and contractors engaged in welding work on regulated equipment.

Q: Is it current or superseded?

A: The document was issued in 2003 (RD 03-614-03) and taken into force by implementing order in 2004; it is listed in current collections of Russian regulatory guidance as an active procedural document. Users should confirm with the relevant supervisory authority for any amendments or later replacement texts.

Q: Is it part of a series?

A: Yes — RD 03-614-03 is one of a set of related procedural documents addressing welding practice and safety for hazardous facilities; closely related documents include RD 03-613-03 and RD 03-615-03 and other sectoral safety rules.

Q: What are the key keywords?

A: Welding equipment, attestation, certification, hazardous production facilities, equipment inspection, operator qualification, Gosgortekhnadzor, procedure RD 03-614-03.