SN RK 5.01-02-2013 PDF

Full title and description

SN RK 5.01-02-2013 (СН РК 5.01-02-2013) — Foundations of buildings and structures. National construction standard of the Republic of Kazakhstan that sets requirements for assessment, design and execution of foundations and supporting ground works for buildings and structures.

Abstract

This standard provides rules and technical requirements for geotechnical investigation, selection and calculation of foundation types, determination of bearing capacity and settlement, and requirements for construction and quality control of foundations for typical buildings and structures in Kazakhstan. It is intended to ensure safe, serviceable and durable foundation solutions appropriate to local soil and climatic conditions.

General information

• Status: Active / In force.
• Publication date: Standard designation year 2013 (SN RK 5.01-02-2013); official printed/collected edition published in Astana (2015) and entered into the 2015 normative base.
• Publisher: Issued as part of the State normative base for architecture, urban planning and construction of the Republic of Kazakhstan under the authorized state construction authorities (official Astana publication).
• ICS / categories: Civil engineering — Earthworks, excavation and foundation construction (ICS 93.020; foundations classification ICS 93.020.45).
• Edition / version: SN RK 5.01-02-2013 (2013 edition / adopted document number: 2013).
• Number of pages: 24 (electronic / PDF versions commonly distributed as a 24‑page document).

Scope

Applies to the design, verification and construction control of foundations and foundation soils for buildings and structures covered by national building practice. The standard addresses necessary geotechnical investigation, criteria for allowable bearing capacity and settlement, design rules for shallow and typical foundations, requirements for ground improvement and construction quality. More specialised foundation types (for example pile foundation design) are handled in separate СН РК documents where applicable.

Key topics and requirements

• Requirements for geotechnical site investigation and reporting (sampling, in-situ testing and laboratory tests).
• Classification of soils and assignment of geotechnical parameters for design.
• Methods for determination of bearing capacity and calculation of settlements.
• Selection and calculation rules for shallow foundations (strip, spread, raft), and requirements for frost protection and drainage.
• Rules for ground improvement, backfilling and compaction, and special instructions for working in problematic soils.
• Construction and quality control procedures for foundation works, including acceptance criteria and documentation.

Typical use and users

Used by geotechnical and structural engineers, design organisations, construction contractors, building inspectors and regulatory authorities in Kazakhstan. It is referenced in design documentation, technical specifications, construction permits and conformity checks for foundation works on typical civil, residential and industrial projects.

Related standards

Closely related СН РК and СП РК documents in the same thematic group, for example: СН РК 5.01-01-2013 (Earthworks, foundations and subbases), СН РК 5.01-03-2013 (Pile foundations), and the set of SP RK design rules (SP RK 5.01-101 / 102 series) that provide complementary design procedures and national application rules. These documents form the 2015 construction normative base of Kazakhstan.

Keywords

SN RK 5.01-02-2013; СН РК; foundations; foundations of buildings; geotechnical investigation; bearing capacity; settlement; shallow foundations; Kazakhstan; construction norms.

FAQ

Q: What is this standard?

A: SN RK 5.01-02-2013 is a national construction standard of the Republic of Kazakhstan that defines technical requirements for foundations of buildings and structures (Основания зданий и сооружений).

Q: What does it cover?

A: It covers geotechnical investigation requirements, soil classification and parameters, methods to determine bearing capacity and settlements, design guidance for typical (mostly shallow) foundations, ground improvement and construction quality control measures. Special foundation topics (e.g., pile foundations) are addressed in separate СН РК documents.

Q: Who typically uses it?

A: Geotechnical and structural engineers, design bureaus, contractors executing foundation works, building regulators and technical auditors working on projects in Kazakhstan.

Q: Is it current or superseded?

A: The standard is identified by the 2013 designation and is listed among the active СН РК documents in the 2015 national normative collection; commonly referenced as in-force for use since the 2015 publication/implementation of the construction normative base. Users should verify whether any later amendments or successor documents apply for a specific project.

Q: Is it part of a series?

A: Yes — it belongs to the СН РК series covering geotechnical, foundation and structural rules (examples: СН РК 5.01-01, 5.01-02, 5.01-03 and associated SP RK design rules). These grouped documents together form the national regulatory framework for foundations and related works.

Q: What are the key keywords?

A: Foundations, geotechnical investigation, bearing capacity, settlement, shallow foundations, ground improvement, СН РК, Kazakhstan.