SP 22.13330.2016 PDF

Full title and description

SP 22.13330.2016 — "Основания зданий и сооружений" (Soil bases / Foundations of buildings and structures). This свод правил is the updated edition of СНиП 2.02.01‑83* and sets design, calculation and normative requirements for bases and foundations of buildings and structures in excavations and open workings; it is issued by the Ministry of Construction, Housing and Utilities of the Russian Federation.

Abstract

SP 22.13330.2016 establishes requirements for geotechnical investigations, selection of design parameters of soils, calculation of bearing capacity and settlements, design of shallow and deep foundations (where applicable), measures for working in excavations and interaction between structures and ground. It includes provisions for design documentation, normative values and reference calculation procedures and has been amended several times since initial approval to reflect technical updates.

General information

• Status: Active / in force.
• Publication date: Approved by order of the Ministry of Construction on 16 December 2016; introduced into force (effective) 17 June 2017 (implementation dates as published).
• Publisher: Ministry of Construction, Housing and Utilities of the Russian Federation (Минстрой России).
• ICS / categories: OKC / ICS 93.020 (Foundations, soils and geotechnical aspects of building foundations).
• Edition / version: SP 22.13330.2016 — updated edition of СНиП 2.02.01‑83*. Includes published amendments (No.1, 2, 3, 4, etc.) issued after 2016.
• Number of pages: Varies by publication and language/format; commonly published editions list approximately 160–220 pages depending on inclusion of annexes and amendments.

Scope

The rules apply to the design of foundations and bases of newly constructed and reconstructed buildings and structures executed in pits, trenches and open workings. The standard does not apply to design of bases for hydraulic structures, roads and airfield pavements, structures built on permafrost soils, nor to bases of deep supports and machine foundations subject to significant dynamic loads. It covers requirements for site investigation, selection of soil design parameters, calculation methods for bearing capacity and settlement, and measures for temporary and permanent support of excavations.

Key topics and requirements

• Geotechnical investigation scope and methods (field and laboratory testing) to determine soil stratigraphy and design parameters.
• Normative design values for soil strength, compressibility and groundwater conditions; procedures to determine characteristic and design soil parameters.
• Calculation methods for ultimate bearing capacity and serviceability settlements for shallow foundations, strip and pad foundations.
• Rules for design and verification of deep foundations (piles, pile groups) where applicable; interaction and group effects.
• Requirements for design of foundations in excavations, including temporary support systems and earth-retaining structures during construction.
• Criteria for classification of soils and for selection of mitigation measures (improvement, drainage, ground reinforcement).
• Documentation and reporting requirements for geotechnical design and justification of adopted solutions.

Typical use and users

Used by geotechnical and structural engineers, foundation designers, design institutes, construction contractors, technical supervisors and regulatory authorities involved in foundation design and construction in the Russian Federation and by practitioners who adopt Russian normative documents internationally. It is applied at project design stages (concept, working design) and in preparation of construction and excavation works.

Related standards

SP 22.13330.2016 is an updated edition of СНиП 2.02.01‑83*. Related and cross‑referenced standards include other SP documents dealing with piles and deep foundations, earth structures and engineering surveys (for example SP 24.13330 — pile foundations; SP 45.13330 — earth structures, bases and foundations; SP 47.13330 — engineering survey rules), as well as specific amendments and normative references listed in the text of SP 22.13330.2016.

Keywords

foundations; bases; soils; geotechnical investigation; bearing capacity; settlement; piles; excavations; СНиП; СП; Минстрой.

FAQ

Q: What is this standard?

A: SP 22.13330.2016 is the Russian "Свод правил" for foundations and bases of buildings and structures — an updated edition of СНиП 2.02.01‑83* that sets rules for geotechnical design and foundation design.

Q: What does it cover?

A: It covers scope and methods of geotechnical investigations, normative soil parameters, calculation procedures for bearing capacity and settlements, design rules for shallow and some deep foundations, requirements for working in excavations and documentation for foundation design.

Q: Who typically uses it?

A: Geotechnical and structural engineers, design organizations, construction contractors and regulatory bodies responsible for foundation design and safe construction in accordance with Russian practice.

Q: Is it current or superseded?

A: SP 22.13330.2016 is an active (in‑force) свод правил; since 2016 it has received several amendments (published as numbered changes) which should be checked and applied together with the base text when preparing design documentation.

Q: Is it part of a series?

A: Yes — it is one of a set of SP (Свод правил) documents covering different aspects of building design and construction (foundations, loads, materials, earthworks, surveys, etc.) and is cross‑referenced with other SP and СНиП documents.

Q: What are the key keywords?

A: Foundations, bases, soils, geotechnical investigation, bearing capacity, settlement, piles, excavations, СНиП, СП, Минстрой.