SP 30.13330.2016 PDF

Full title and description

SP 30.13330.2016 — "Внутренний водопровод и канализация зданий" / "Internal water supply and drainage (sewerage) systems in buildings". A set of design rules for internal cold and hot water supply, sewage and roof drainage systems in residential, public and industrial buildings (construction and reconstruction), including provisions for calculation of water consumption, hydraulic sizing, materials, installation, testing and commissioning. (Contains Amendment No.1.)

Abstract

This svod pravil (SP) establishes requirements and recommended practices for the design of internal plumbing — cold and hot potable water supply, internal sewage (sanitary drainage) and roof/stormwater drains — inside buildings. It defines where the rules apply (building types and height limits), calculation methods for water demand and circulation, thermal losses in hot-water circulation, hydraulic sizing of pipes and pumps, installation details for fixtures and meters, sanitary and material requirements, and testing/acceptance procedures. The 2016 edition updated previous SNIP provisions and was later superseded by a 2020 revision.

General information

• Status: Superseded / replaced (major parts incorporated into national mandatory lists remain applicable until formally changed).
• Publication date: Approved 16 December 2016; officially introduced (date of application) June 17, 2017.
• Publisher: Ministry of Construction and Housing and Communal Services of the Russian Federation (Минстрой России).
• ICS / categories: Construction engineering — Building installations; water supply and drainage (e.g., ICS 91.140 — installations in buildings; subfields: water supply and drainage).
• Edition / version: SP 30.13330.2016 (2016 edition, with Amendment No.1); later revised by SP 30.13330.2020 (entered into force 1 July 2021).
• Number of pages: Approximately 82 pages (official PDF edition — varies by publisher/format).

Scope

The rules apply to the design of internal cold and hot water supply systems, sanitary sewerage and internal roof/storm drainage for: industrial buildings (new and reconstructed), public buildings up to 55 m in height, and residential buildings up to 75 m in height, including multifunctional buildings. The document excludes certain specialized technological or medical water-supply systems (for example, systems supplying water for medical procedures, specific industrial technological process water systems and equipment internal process supply), which are covered by industry-specific regulations.

Key topics and requirements

• Design principles for internal cold and hot potable water distribution and internal sewage systems (sanitary drainage and roof drains).
• Methods to calculate daily and peak (hourly) water consumption for various building types and sanitary fixtures.
• Calculation of circulation (recirculation) flows for hot water systems, accounting for pipe heat losses and thermal insulation.
• Hydraulic sizing of pipelines, selection of diameters, velocity and head loss limits, and pump selection for system supply and circulation.
• Permissible pressure limits, pressure regulation and use of pressure-reducing devices in high-rise buildings.
• Temperature requirements for hot water supply, and requirements related to water quality and compliance with sanitary regulations.
• Requirements for fittings, backflow prevention, water meters and metering assemblies, filters and check valves.
• Materials, corrosion protection and thermal insulation recommendations for pipelines and fittings.
• Design and sizing rules for internal stormwater and roof drainage, traps, venting and connection to external sewerage.
• Testing, commissioning, documentation and acceptance procedures for internal water and sewage systems.

Typical use and users

Primary users are building services engineers, plumbing and MEP designers, architectural design teams, construction contractors, project managers and regulatory compliance officers working on residential, public and industrial building projects in Russia and regions applying Russian design norms. The standard is used during concept design, detailed engineering, equipment selection, tender documentation preparation and commissioning of internal water and sewage systems.

Related standards

Relevant documents and related standards include the earlier SNIP/SNiP 2.04.01-85* (historical reference), the revised SP 30.13330.2020 (successor), applicable Sanitary Rules (SanPiN / Sanitary regulations) for drinking water quality, and national GOST/GOST R standards covering pipes, fittings, valves, water meters and building installations. Designers should also check other SP documents that intersect with MEP installations and fire/safety requirements.

Keywords

internal water supply, hot water, cold water, circulation, sewerage, drainage, roof drains, plumbing design, hydraulic calculation, water consumption, metering, pump selection, thermal insulation, Russia, СП 30.13330.2016

FAQ

Q: What is this standard?

A: SP 30.13330.2016 is a Russian "svod pravil" (set of rules) governing the design of internal water supply and sewage systems in buildings — covering cold and hot water distribution, sanitary drainage and roof/storm drainage, plus related installation and testing requirements.

Q: What does it cover?

A: It covers scope and application limits (building types/heights), calculation methods for water demand and circulation, hydraulic sizing of pipes and pumps, pressure and temperature requirements, materials and fittings, metering and backflow prevention, internal stormwater drainage, and testing/commissioning procedures.

Q: Who typically uses it?

A: MEP and plumbing engineers, architects, contractors, project managers and building code compliance specialists working on residential, public and industrial buildings where Russian design rules are applied.

Q: Is it current or superseded?

A: The 2016 edition has been superseded by SP 30.13330.2020 (the 2020 revision entered into force on 1 July 2021). However, some mandatory provisions from the 2016 text that were incorporated into national mandatory lists may remain applicable until those lists are updated — check current regulatory status before relying solely on the 2016 text.

Q: Is it part of a series?

A: Yes. SP 30.13330.2016 belongs to the family of Russian "SP" (Svod Pravil) documents covering building engineering and installations; it references and interacts with other SP/GOST/SanPiN documents for related fields (electrical, heating/ventilation, materials, sanitary quality, etc.).

Q: What are the key keywords?

A: Internal water supply, sewerage, hot water circulation, hydraulic calculation, water consumption, drainage, plumbing design, metering, pumps, thermal losses.