ISO 4310-2009 PDF

Full title and description

St ISO 4310-2009 — ISO 4310:2009: Cranes — Test code and procedures. This International Standard specifies the tests, inspections and procedures used to verify that a crane conforms to its operational specifications and is capable of lifting its rated loads prior to first use or after modification/repair of load-bearing components.

Abstract

ISO 4310:2009 defines conformity tests, visual inspections and load-lifting test procedures for the types of cranes defined in ISO 4306-1. It includes specific provisions for verifying stability-based rated loads by prescribing appropriate test procedures and test loads so that stability margins can be readily checked. The standard is intended for application before first use and after structural modification or repair of an individual crane.

General information

• Status: Published (International Standard; currently indicated as "to be revised").
• Publication date: 2009 (Edition 2 — published late May / June 2009; commonly cited publication date: 28 May 2009 / June 2009).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 53.020.20 (Cranes).
• Edition / version: Edition 2 (2009).
• Number of pages: 10 pages.

Scope

Specifies the tests, inspections and procedures to verify a crane's conformance with its operational specifications and its capability to lift rated loads. Applicable to crane types designated in ISO 4306-1 and intended for use prior to first operation or after modification or repair of load-bearing structures or components. Where rated loads are limited by stability, the standard prescribes test procedures and test loads that allow stability margins to be verified easily.

Key topics and requirements

• Pre-delivery and post-repair conformity tests and inspections.
• Visual inspection criteria for load-bearing components and safety-related items.
• Load-lifting test procedures to verify rated capacities under specified conditions.
• Test loads and procedures for verifying stability-limited rated loads and stability margins.
• Documentation and acceptance criteria for test results and any remedial actions.

Typical use and users

Used by crane manufacturers, commissioning engineers, inspection and testing bodies, plant owners/operators, maintenance teams, and certification authorities to establish and perform acceptance and post-repair testing of cranes. It is referenced when preparing acceptance documentation or planning commissioning tests to demonstrate compliance with rated load claims and stability requirements.

Related standards

Commonly used alongside other crane standards such as ISO 4306-1 (Cranes — Vocabulary), ISO 7363 (technical/acceptance documentation for lifting appliances), and the ISO 9927 and ISO 12480 series (inspections and safe use of cranes). ISO has an approved work item (ISO/AWI 4310) to develop a revised edition intended to replace ISO 4310:2009.

Keywords

cranes, test code, load test, stability test, inspection, conformity, crane acceptance, ISO 4310:2009, commissioning, post-repair testing

FAQ

Q: What is this standard?

A: ISO 4310:2009 (St ISO 4310-2009) is an ISO International Standard titled "Cranes — Test code and procedures" that prescribes tests and procedures to verify crane conformity and lifting capability prior to first use or after structural repair or modification.

Q: What does it cover?

A: It covers visual inspections, conformity tests and load-lifting test procedures (including stability checks and prescribed test loads) for the crane types defined in ISO 4306-1, and gives acceptance criteria and documentation expectations for these tests.

Q: Who typically uses it?

A: Manufacturers, commissioning and test engineers, inspection bodies, maintenance personnel, plant owners/operators and certification authorities use ISO 4310:2009 when performing acceptance tests, commissioning or post-repair verification of cranes.

Q: Is it current or superseded?

A: ISO 4310:2009 is a published International Standard (Edition 2, 2009). ISO records indicate the standard is in the lifecycle stage "to be revised" and an ISO/AWI 4310 project exists to produce a revision; users should check national/ISO publication listings for the latest status before relying on it for compliance decisions.

Q: Is it part of a series?

A: It forms part of the body of ISO crane standards and is commonly used together with ISO 4306 (vocabulary/classification), ISO 7363 (technical and acceptance documents) and the ISO 9927 / ISO 12480 series (inspections and safe use). These standards collectively address terminology, testing, inspection and safe operation of cranes.

Q: What are the key keywords?

A: Crane testing, load test, stability, inspection, acceptance test, commissioning, conformity, ISO 4310, crane standards.