ISO 5611-10-2015 PDF

Full title and description

ISO 5611-10:2015 — Cartridges, type A, for indexable inserts — Part 10: Style U. Specifies requirements and dimensional characteristics for type A cartridges with hole(s) for fastening screw(s) of style U (cutting edge angle κr = 93°) intended for use with indexable inserts (hard metal, ceramic or other cutting materials) primarily for internal turning operations.

Abstract

This part of ISO 5611 describes the form U cartridge (style U) for type A cartridges used with indexable inserts. It defines the key geometric features (including cutting-edge angle κr = 93° for end cutting), fastening-hole arrangements and dimensional data necessary to ensure interchangeability and correct mounting for internal turning tool assemblies. The standard is targeted at cartridge and toolholder designers, insert manufacturers and users performing turning operations.

General information

• Status: Published (International Standard).
• Publication date: 18 November 2015.
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 25.100.01 — Cutting tools in general.
• Edition / version: Edition 1 (2015).
• Number of pages: 5 pages (ISO published document length).

Scope

ISO 5611-10:2015 applies to type A cartridges with hole(s) for fastening screw(s) of style U. It covers dimensional requirements and form features for cartridges intended to receive indexable inserts for end cutting with a cutting edge angle κr = 93°. The scope is limited to the cartridge geometry and related mounting features needed to ensure compatibility with indexable inserts and with the ISO 5611 series of cartridge parts used for internal turning. It does not cover insert geometry beyond mounting interface details or specific cutting-material grades.

Key topics and requirements

• Definition of style U cartridge geometry and dimensional tolerances (cutting-edge angle κr = 93° for end cutting).
• Specification of hole(s) for fastening screw(s) and mounting features required for secure insert retention and repeatable positioning.
• Compatibility requirements with indexable inserts made of hard metal, ceramic or other cutting materials.
• Interchangeability guidance to support tool‑holder and cartridge manufacturers in producing compatible parts across suppliers.
• References and alignment with the broader ISO 5611 series (other part numbers that define alternative styles and dimensions).

Typical use and users

Typical users include toolholder and cartridge manufacturers, cutting-tool designers, insert producers, quality and standards engineers, and CNC machining shops performing internal turning operations. The standard is used to design and verify cartridges that accept indexable inserts, to ensure interchangeability between suppliers, and to document product specifications in procurement and quality-control processes.

Related standards

ISO 5611-10:2015 is one part of the ISO 5611 series that replaces the earlier consolidated ISO 5611:1995. Other parts in the series include ISO 5611-1 through ISO 5611-12 (each covering different cartridge styles and related dimensions). The earlier ISO 5611:1995 has been withdrawn and superseded by the 2015 multipart series.

Keywords

ISO 5611-10:2015, cartridges type A, style U, form U, indexable inserts, cutting-edge angle κr = 93°, internal turning, toolholder cartridges, fastening holes, cartridge dimensions, interchangeability.

FAQ

Q: What is this standard?

A: ISO 5611-10:2015 is an International Standard that specifies the dimensions and form requirements for type A cartridges of style U used with indexable inserts for internal turning (cutting-edge angle κr = 93°).

Q: What does it cover?

A: It covers cartridge geometry, fastening‑hole arrangements, and dimensional data required for compatibility and interchangeability of style U type A cartridges with indexable inserts. It does not specify insert metallurgy or cutting parameters.

Q: Who typically uses it?

A: Manufacturers of cartridges and toolholders, insert suppliers, design and quality engineers, and machining shops performing internal turning operations use this standard to ensure parts are manufactured and fitted consistently.

Q: Is it current or superseded?

A: ISO 5611-10:2015 was published on 18 November 2015 and is the published part for style U; it, together with the other ISO 5611-1…-12 parts, supersedes the earlier ISO 5611:1995. ISO standards are subject to periodic review (typically every five years). Users should check national or ISO catalogues for the current status at the time of purchase or reference.

Q: Is it part of a series?

A: Yes — ISO 5611-10:2015 is part of the multipart ISO 5611 series (parts 1–12), each covering different cartridge styles, forms and dimensions for type A cartridges for indexable inserts.

Q: What are the key keywords?

A: Cartridges type A, style U, indexable inserts, κr = 93°, internal turning, cartridge dimensions, fastening holes, interchangeability, ISO 5611.