ISO 8041-1-2017 PDF

Full title and description

ISO 8041-1:2017 — Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters. This part of ISO 8041 specifies performance requirements, tolerance limits and verification/validation procedures for instruments used to measure vibration relevant to assessing human exposure (hand‑arm and whole‑body applications), and defines requirements for in‑situ checks and calibrators.

Abstract

ISO 8041-1:2017 sets out the performance specifications and tolerance limits for vibration measuring instruments intended for assessment of human response to vibration. It covers single instruments, combined measurement systems and computer‑based acquisition/analysis systems; defines frequency weightings applicable to hand‑arm and whole‑body vibration; and specifies three levels of performance testing: pattern evaluation/validation, periodic verification and in‑situ checks, including the specification of vibration calibrators for field checks.

General information

• Status: Published / Current
• Publication date: May 2017 (ISO designation 2017-05; listed by some distributors as 3 May 2017)
• Publisher: International Organization for Standardization (ISO)
• ICS / categories: 13.160 — Vibration and shock with respect to human beings
• Edition / version: Edition 1 (2017)
• Number of pages: 106 (ISO edition); national/adopted versions may show different pagination.

Scope

This document applies to vibration measuring instruments used for assessing human exposure to vibration. It specifies functional and metrological requirements for instruments intended for one or more applications (hand‑arm vibration, whole‑body vibration including low‑frequency ranges) and describes test levels for initial pattern evaluation/validation, periodic verification and rapid in‑situ checks. It also specifies the characteristics required for vibration calibrators used for field checks.

Key topics and requirements

• Performance specifications and tolerance limits for vibration meters and measurement systems.
• Definitions of applicable frequency weightings for hand‑arm and whole‑body vibration measurements.
• Three levels of conformance testing: pattern evaluation/validation, periodic verification, and in‑situ checks.
• Requirements for vibration calibrators used for in‑situ checks and verification procedures.
• Applicability to single instruments, modular systems and computer‑based acquisition and analysis systems.
• Guidance on uncertainty, accuracy, and basic test procedures needed to demonstrate conformance.

Typical use and users

Used by occupational health and safety professionals, industrial hygienists, ergonomists, vibration and acoustics engineers, test laboratories, instrument manufacturers and calibration providers to select, test, validate and verify vibration meters and systems for workplace exposure assessment and product testing.

Related standards

Related and referenced documents include the earlier ISO 8041:2005 (withdrawn/replaced), standards for hand‑arm vibration (ISO 5349‑1), whole‑body vibration (ISO 2631‑1, ISO 2631‑2, ISO 2631‑4), calibration and calibration-method standards in the ISO 16063 series, and guidance/terminology such as ISO/TR 19664:2017. National and regional adoptions (EN, DIN, NEN, ÖNORM, etc.) reproduce ISO 8041-1:2017 with local pagination/forewords.

Keywords

vibration meter; human response to vibration; whole‑body vibration; hand‑arm vibration; measurement instrumentation; calibration; verification; in‑situ check; frequency weighting; occupational exposure.

FAQ

Q: What is this standard?

A: ISO 8041-1:2017 is an international standard that specifies performance requirements and verification procedures for general‑purpose vibration meters used to assess human exposure to vibration.

Q: What does it cover?

A: It covers instrument performance and tolerances, applicable frequency weightings, test/validation levels (pattern evaluation, periodic verification, in‑situ checks), and the specification of vibration calibrators for field checks; applicable to hand‑arm and whole‑body vibration measurements.

Q: Who typically uses it?

A: Occupational health and safety practitioners, vibration/acoustics engineers, instrument manufacturers, calibration laboratories, ergonomists and researchers who measure or regulate human vibration exposure.

Q: Is it current or superseded?

A: ISO 8041-1:2017 is the current published part replacing the earlier ISO 8041:2005 series; the 2017 part was confirmed in ISO’s review cycle and is considered the applicable edition for part 1 requirements.

Q: Is it part of a series?

A: Yes — ISO 8041 is a family addressing measuring instrumentation for human response to vibration. ISO 8041-1:2017 is Part 1 (general‑purpose vibration meters); other related ISO documents and technical reports (for example ISO/TR guidance documents) complement the series.

Q: What are the key keywords?

A: vibration meter; human vibration; hand‑arm vibration; whole‑body vibration; calibration; verification; measurement instrumentation; occupational exposure.