ISO IEC 24734-2021 PDF

Full title and description

ISO/IEC 24734:2021 — Information technology — Office equipment — Method for measuring digital printing productivity. This international standard specifies a reproducible test method, including test files, test setup, runtime procedures and reporting requirements, for measuring the digital printing productivity of single‑function and multi‑function printing devices across a range of office applications and job characteristics.

Abstract

Defines a standardized procedure to measure and report the productivity of digital printing devices (inkjet, laser, etc.) for black & white and colour output. The standard supports direct and networked device configurations and allows like‑for‑like comparisons of productivity when test conditions (environment, job mix, operating modes) are controlled. It explicitly excludes use for devices that cannot print on A4 / 8.5" × 11" media or cannot collate multiple copies, and it is not intended to replace manufacturers' rated speeds.

General information

• Status: Published / Current international standard.
• Publication date: 9 April 2021.
• Publisher: ISO/IEC (ISO/IEC JTC 1/SC 28 - Office equipment).
• ICS / categories: 37.100.10 (Reproduction equipment / Office equipment).
• Edition / version: Edition 3.0 (2021).
• Number of pages: 61 pages.

Key bibliographic and lifecycle details (edition, date, pages and technical committee) are recorded in the ISO/IEC publication entry and associated national adoptions.

Scope

Specifies a method to measure digital printing productivity for office equipment: single‑function and multi‑function devices across printing technologies (inkjet, laser, etc.). The scope covers test file selection, test setup, run procedure and reporting for B&W and colour printing, and supports comparisons across simplex/duplex and different substrate sizes when test conditions are consistent. It excludes devices that cannot print on A4 / 8.5" × 11" media or cannot collate multiple copies, and it does not replace manufacturer rated speeds.

Key topics and requirements

• Standardized test files and workload definitions for representative office job mixes.
• Detailed test setup: hardware and software baseline, network vs. direct connection considerations.
• Run procedure: warm‑up, throughput measurement, handling of duplex and finishing options.
• Reporting requirements: required device configuration details, measured throughput, and environmental/test conditions for repeatability.
• Limitations and exclusions (A4 / 8.5" × 11" media requirement, collation capability, not a substitute for rated speed claims).

These core requirements are intended to produce repeatable, comparable productivity measurements across devices and vendors.

Typical use and users

Used by test laboratories, standards bodies, printer manufacturers, procurement teams, third‑party reviewers and corporate IT groups to evaluate and compare printing productivity under controlled, repeatable conditions. It is also used to validate performance claims, support competitive benchmarking, and inform purchasing decisions for office printing fleets.

Related standards

ISO/IEC 24734:2021 replaces earlier editions (ISO/IEC 24734:2014 and ISO/IEC 24734:2009) and related corrigenda; it is part of the body of ISO/IEC JTC 1/SC 28 standards concerning office equipment and reproduction devices. National adoptions and identical adoptions (for example by INCITS/ANSI) reflect its international acceptance.

Keywords

printing productivity, digital printing, office equipment, printer benchmarking, throughput measurement, test procedure, ISO/IEC JTC 1/SC 28, A4, collate, test files

FAQ

Q: What is this standard?

A: ISO/IEC 24734:2021 is an international standard that defines a method for measuring the digital printing productivity of office printing devices, including specified test files, test setup, runtime procedure and reporting requirements.

Q: What does it cover?

A: It covers productivity measurement for single‑function and multi‑function printing devices across common office print jobs (B&W and colour), specifying how to run tests and report results so measurements are reproducible and comparable. It excludes devices that cannot handle A4 / 8.5" × 11" media or cannot collate.

Q: Who typically uses it?

A: Test laboratories, manufacturers, IT procurement teams, reviewers and standards organizations use the standard for benchmarking, validation of performance claims and procurement assessment.

Q: Is it current or superseded?

A: Current — ISO/IEC 24734:2021 (published 9 April 2021) is the active edition and supersedes ISO/IEC 24734:2014 and earlier editions/corrigenda.

Q: Is it part of a series?

A: It is part of the set of ISO/IEC JTC 1/SC 28 standards related to office equipment and reproduction devices; it sits alongside other SC 28 documents addressing measurement, interfaces and functionality for office printing and imaging products.

Q: What are the key keywords?

A: Printing productivity, throughput, office equipment, digital printing, benchmark, test method, ISO/IEC 24734.