BS 1664-8-1974 PDF

Full title and description

STB BS 1664-8-1974 — National adoption (STB) of British Standard BS 1664, Part 8, published in 1974. This record describes the national designation and bibliographic details for the Part 8 document of the BS 1664 series as it was adopted under the STB scheme. The standard defines technical requirements, test methods and/or specification details included in part 8 of the BS 1664 family as issued in 1974.

Abstract

This product-page entry summarizes the bibliographic and practical information for STB BS 1664-8-1974. It identifies the item as a national adoption of a British Standard part from 1974, outlines the likely scope and typical applications, lists editorial metadata where available or estimated, and provides guidance for users who need the authoritative text or confirmation of current status.

General information

• Status: Original publication 1974 — current status not specified here; the document may be superseded, withdrawn, or still valid depending on national/BSI updates. Users should verify with the issuing body for definitive status.
• Publication date: 1974 (part designation: Part 8 — issued 1974).
• Publisher: STB (national adoption) — original standard developed by the British Standards Institution (BSI) as BS 1664 Part 8.
• ICS / categories: Not specified in this entry; likely falls under the mechanical engineering/engineering practice or product group relevant to the BS 1664 series. Confirm exact ICS code from the full text or national registry.
• Edition / version: First edition (1974) as adopted — edition details should be confirmed against the issuing registry for amendments or reprints.
• Number of pages: Not specified (not available in this summary). Ordering or registry records from the national standards body or BSI will provide page counts.

Scope

This entry covers the national adoption under the STB designation of the British Standard BS 1664 — Part 8, as originally published in 1974. The scope of the underlying Part 8 is not reproduced here; generally a "Part" in a BS series focuses on a specific sub-topic within the overall subject of the series (for example: a particular product type, testing method, dimensional series or quality requirement). To determine the exact technical scope (what is specified, for which products or processes, and any exclusions), consult the full standard text or the national standards catalogue.

Key topics and requirements

• Adoption note: indicates the national adoption of a British Standard Part (administrative and bibliographic alignment with BS 1664-8:1974).
• Technical specification elements typical of a Part‑based standard: dimensional requirements, material or performance criteria, tolerances and limits.
• Test methods and inspection criteria that may be referenced or specified for compliance verification.
• Marking, labelling or documentation requirements associated with products or components covered by the part.
• Normative references to other standards or parts within the BS 1664 series or related standards bodies.

Typical use and users

Manufacturers, product designers, procurement and quality managers, test laboratories, conformity assessment bodies, and standards librarians who need to identify or procure the specific Part 8 text. Regulatory or contracting parties referencing historical specifications may also consult this record to confirm the existence and bibliographic data of the adopted standard.

Related standards

Other parts of the BS 1664 series (e.g., BS 1664-1, -2, etc.) and any later revisions or successor standards from BSI or international equivalents (ISO/EN) that cover the same subject matter. National adoption records related to STB and other national prefixes that mirror BSI publications are also relevant. For precise cross-references, consult the full bibliographic list in the document or the issuing body’s catalogue.

Keywords

STB, BS 1664, 1664-8, Part 8, 1974, national adoption, British Standard, specification, technical standard, adoption record

FAQ

Q: What is this standard?

A: STB BS 1664-8-1974 is the national designation (STB) showing the adoption of British Standard BS 1664, Part 8, originally published in 1974. It identifies the adopted part within the STB catalogue but does not itself reproduce the full technical text.

Q: What does it cover?

A: This summary does not reproduce the technical content. Part 8 of a BS 1664 series would normally address a specific sub-topic of the series (for example: a particular product, test method, or specification subset). To know exactly what Part 8 covers, obtain the full standard text from the national standards body or BSI.

Q: Who typically uses it?

A: Engineers, manufacturers, procurement and quality professionals, test labs and conformity assessors who need to apply, verify or reference the technical requirements contained in the standard; also standards librarians and regulatory bodies tracking historical specifications.

Q: Is it current or superseded?

A: This entry lists the original publication year (1974). Whether the standard is current, amended, superseded or withdrawn is not determined here — users should verify the current status with the national standards catalogue or the standards publisher before relying on the document for compliance or procurement.

Q: Is it part of a series?

A: Yes — the identifier indicates it is Part 8 of the BS 1664 series. Other parts in the BS 1664 family address related topics; check the series index in the national catalogue or BSI records for a full list of parts and their scopes.

Q: What are the key keywords?

A: STB, BS 1664, part 8, 1974, British Standard adoption, specification, technical requirement, national adoption.