BS EN 12365-1-2003 PDF

Full title and description

STB BS EN 12365-1-2003 — Building hardware — Gasket and weatherstripping for doors, windows, shutters and curtain walling — Part 1: Performance requirements and classification. This part specifies general performance requirements, a six‑digit classification/coding system and basic test/marking/packaging requirements for gaskets and weatherstripping used to control the passage of air, water, noise and energy between openable and fixed elements of fenestration and curtain walling.

Abstract

EN 12365‑1:2003 defines performance criteria and a classification scheme applicable to gaskets and weatherstripping of any material used for glazing, draft and weather sealing of doors, windows, shutters and curtain walling. It sets minimum characteristics, general requirements and references to test methods (covered in subsequent parts) and excludes in‑situ extruded sealants, mastics and putties. The standard promotes consistent labelling and packaging to protect products during transport and storage.

General information

• Status: Published / Adopted as a national standard (EN adopted by CEN; published and available as BS EN 12365‑1:2003).
• Publication date: 2003 (EN approval and publication in 2003; BS adoption recorded 4 October 2003).
• Publisher: European Committee for Standardization (CEN) — published as EN 12365‑1:2003; adopted/published nationally by member bodies (example: BSI as BS EN 12365‑1:2003).
• ICS / categories: 91.060.50 (Doors and windows); 91.190 (Building accessories).
• Edition / version: EN 12365‑1:2003 (national editions commonly designated BS EN 12365‑1:2003, NBN EN 12365‑1:2003, etc.).
• Number of pages: Typical national publications list roughly 10–14 pages depending on the translation/publisher (examples: NEN lists ~10 pages; some national copies show 11–14 pages).

Scope

Specifies performance requirements, classification rules and general requirements for all forms of gaskets and weatherstripping intended to control the passage of air, water, noise and energy between openable and fixed parts of doors, windows, shutters and curtain walling. The standard applies to products of any material but does not apply to sealants, mastics, putties or similar materials extruded in liquid/viscous form at the place of use. Methods of test and more detailed procedures are provided in related parts of the EN 12365 series.

Key topics and requirements

• Six‑digit classification/coding system covering: category of use, working range, linear compression force, working temperature range, deflection recovery and recovery after ageing.
• General performance requirements addressing mechanical compatibility, durability, recovery and effects on operation of the finished product.
• Referenced test methods (compression test, deflection recovery test, recovery after ageing, etc.), with formal test procedures provided in subsequent parts of EN 12365.
• Labelling and packaging requirements to ensure correct identification and protection against deformation/damage during transport and storage.
• Exclusions and limits of application: not applicable to in‑situ extruded sealants, mastics or putties.

Typical use and users

Manufacturers and suppliers of gasket and weatherstripping products; window, door and curtain‑wall system designers and specifiers; test laboratories and certification bodies; architects, façade engineers and building authorities who need to specify or verify sealing performance for airtightness, watertightness, acoustic isolation and thermal control. The standard provides a common performance language for procurement, product datasheets and conformity assessment.

Related standards

EN 12365‑1 is part of a small series (other parts cover specific test methods and detailed assessments). It is commonly used alongside fenestration standards that classify system performance such as EN 12207 (air permeability classification), EN 12208 (water‑tightness classification) and EN 12210 (resistance to wind load / structural performance), plus national/adopted versions (BS EN, NBN EN, SS‑EN, etc.).

Keywords

gasket, weatherstripping, sealing, fenestration, doors, windows, curtain walling, classification, performance requirements, airtightness, watertightness, acoustic insulation, EN 12365‑1:2003, BS EN 12365‑1:2003.

FAQ

Q: What is this standard?

A: EN 12365‑1:2003 (adopted as BS EN 12365‑1:2003) is a European standard that sets performance requirements and a classification system for gaskets and weatherstripping used in doors, windows, shutters and curtain walling.

Q: What does it cover?

A: It covers general performance requirements, a six‑digit coding/classification system, essential test types (compression, deflection recovery, recovery after ageing) and labelling/packaging rules. It applies to gasket and weatherstripping products of any material but excludes extruded sealants, mastics and putties.

Q: Who typically uses it?

A: Product manufacturers and suppliers, façade and window/door designers, specifiers, test labs, certification bodies, architects and building regulators who need consistent performance criteria for sealing components in building envelopes.

Q: Is it current or superseded?

A: EN 12365‑1:2003 is the 2003 edition; national bodies published/adopted it in 2003–2004 as BS EN 12365‑1:2003 and equivalents. Users should check their national standards body for any later amendments or revisions and for current status in their country.

Q: Is it part of a series?

A: Yes — Part 1 covers performance requirements and classification; related parts of the EN 12365 series contain the referenced test methods and detailed procedures (Parts 2–4 and related documents).

Q: What are the key keywords?

A: Gasket, weatherstripping, sealing, fenestration, classification, airtightness, watertightness, recovery after ageing, compression test, EN 12365‑1:2003.