BS EN ISO 12402-8-2020 PDF

Full title and description

STB BS EN ISO 12402-8:2020 — Personal flotation devices — Part 8: Accessories — Safety requirements and test methods. British adoption of the international ISO 12402-8:2020 standard specifying safety, performance and test methods for accessories used with personal flotation devices (PFDs), such as sprayhoods, crotch straps, harnesses, attachment fittings and other ancillary components.

Abstract

This standard defines safety requirements, design considerations and standardized test methods for accessories intended to be used with personal flotation devices (PFDs). It covers mechanical strength, attachment integrity, materials behaviour (including corrosion and ageing), marking and information, and test procedures used to verify that accessories do not compromise the performance or safety of the PFD to which they are fitted.

General information

• Status: Published (international ISO standard; adopted as BS EN ISO).
• Publication date: ISO publication: July 2020; British (BS EN) adoption published 11 September 2020 (BS adoption date may vary by national body).
• Publisher: International Organization for Standardization (ISO); published/adopted in the UK by BSI as BS EN ISO 12402-8:2020.
• ICS / categories: 13.340.70 — Lifejackets, buoyancy aids and flotation devices.
• Edition / version: Edition 2 (2020).
• Number of pages: ISO original: 15 pages (ISO-format); typical national/BS EN publication uses extended front matter and national foreword — commonly distributed BS/EN PDFs ~26 pages (format-dependent).

Scope

ISO 12402-8:2020 applies to accessories intended for use with personal flotation devices. Its scope is limited to accessories that affect the safe operation or performance of a PFD or its correct donning, retention and user protection. The standard specifies requirements and test methods to ensure accessories maintain integrity during normal use, environmental exposure and foreseeable misuse, and that they do not reduce the protective function of the PFD.

Key topics and requirements

• Definitions and classification of accessories used with PFDs (e.g., sprayhoods, crotch straps, buckles, attachment fittings).
• Design and construction requirements to avoid hazards and to ensure compatibility with PFD performance.
• Mechanical strength and fatigue tests for straps, buckles and fittings (tensile, cyclic loading).
• Corrosion and environmental resistance testing for metallic components and coatings.
• Material ageing and compatibility tests (UV, salt spray, chemical exposure where relevant).
• Retention, attachment and release behaviour tests to verify secure fit and controlled release where required.
• Marking, labelling and user information requirements (identification, limits of use, instructions for fitting and maintenance).
• Conformity assessment and test procedures referenced for verification of compliance.

Typical use and users

Primary users are manufacturers and designers of PFDs and PFD accessories, conformity assessment bodies and test laboratories, notified bodies and certification authorities, procurement specialists for marine and offshore industries, regulators and product safety engineers. The standard is also used by maritime equipment distributors and organisations responsible for fleet and workboat safety to specify compliant accessories.

Related standards

ISO 12402-8 is part of the ISO 12402 series (Personal flotation devices). Related parts include the other parts of the ISO 12402 family that address general requirements, performance levels for lifejackets and buoyancy aids, materials and components, inflatable devices, and evaluation. National and regional adoptions (for example EN ISO 12402 series, and individual national bodies’ publications) are typically published alongside this part.

Keywords

Personal flotation devices, PFD, accessories, ISO 12402-8, sprayhood, crotch strap, buckle, attachment fitting, safety requirements, test methods, lifejacket accessories, corrosion testing, tensile test, marking, BSI, BS EN ISO.

FAQ

Q: What is this standard?

A: ISO 12402-8:2020 (published and adopted as BS EN ISO 12402-8:2020) is the part of the ISO 12402 series that specifies safety requirements and test methods for accessories intended for use with personal flotation devices (PFDs).

Q: What does it cover?

A: It covers accessory types and their definitions, design and construction requirements, mechanical and environmental test methods (for strength, fatigue, corrosion, ageing), and marking and user information to ensure accessories do not compromise PFD performance.

Q: Who typically uses it?

A: Manufacturers and designers of PFDs and accessories, test laboratories, certification and conformity assessment bodies, regulators, procurement teams in marine/offshore sectors, and safety engineers.

Q: Is it current or superseded?

A: The 2020 edition (Edition 2) is the current published edition of ISO 12402-8. The 2020 edition replaced the 2006 edition and its amendment(s). As with all standards, national adoptions (BS EN ISO) may include national forewords or minor editorial changes; check with your national standards body for confirmation of current national status and any amendments.

Q: Is it part of a series?

A: Yes — it is one part of the ISO 12402 series (Personal flotation devices), which collectively covers general requirements, performance levels for lifejackets and buoyancy aids, materials, components, inflatables, evaluation and related topics.

Q: What are the key keywords?

A: Personal flotation devices, PFD accessories, safety requirements, test methods, ISO 12402-8, sprayhood, crotch strap, buckles, attachment fittings, corrosion testing, tensile testing, marking, BSI.