BS IEC 62341-1-1-2009 PDF

Full title and description

STB BS IEC 62341-1-1-2009 — Organic light emitting diode (OLED) displays — Part 1-1: Generic specifications. This document provides generic quality, test and measurement requirements and procedures for OLED display devices to be used for qualification, lot release and conformity assessment in supply chains and certification schemes.

Abstract

IEC 62341-1-1:2009 defines general procedures for quality assessment of OLED displays, establishes rules for electrical and optical measurement methods, and sets out environmental, mechanical and endurance test principles plus sampling and lot-inspection practices. It is intended as a generic foundation document that sectional or detail specifications can reference or extend for product-specific requirements.

General information

• Status: Current (base publication unchanged since 2009; stability/maintenance information published by IEC — see stability date below).
• Publication date: 7 April 2009 (IEC base publication). National/adoption publication dates (EN/BS/UNE translations/adoptions) occurred in 2010–2011.
• Publisher: International Electrotechnical Commission (IEC). Also adopted as EN/BS/UNE national versions by regional bodies.
• ICS / categories: 31.260 — Optoelectronics; electronic displays.
• Edition / version: Edition 1.0 (2009).
• Number of pages: 45 (IEC base publication format).

Scope

This part of IEC 62341 is a generic specification for OLED displays. It specifies general rules and procedures for quality assessment used within IECQ/CECC systems and provides the framework for: grouping and categorizing devices, lot formation and sampling, inspection and screening, conditions for electrical and optical measurements, environmental and mechanical test principles, endurance/accelerated life test guidance, and traceability/marking and handling requirements. The document is intended to be referenced by sectional or product detail specifications that will add device-specific limits and test sequences.

Key topics and requirements

• General technical and administrative rules: order of precedence, standard atmospheric and dark-room conditions for measurements, marking and traceability, packing.
• Categories of assessed quality and screening requirements (definition of Category I/II/III and screening sequences).
• Quality assessment procedures including eligibility for qualification approval, lot formation, handling of commercially confidential information and subcontracting rules.
• Quality approval and capability approval procedures and criteria.
• Inspection grouping: Group A (visual and primary electrical/optical checks), Group B (mechanical/environmental/endurance tests), Group C (periodic checks) and related subgroups.
• Statistical sampling procedures and acceptance plans (AQL and LTPD-based sampling, small-lot hypergeometric sampling options).
• General rules for electrical and optical measurements (setup, precautions, referenced electro‑optical parameters).
• Environmental, mechanical and endurance test principles (general procedures and accelerated test guidance to support reliability qualification).
• Requirements for certified records of released lots (CRRL), screening removal of defectives and handling of destructive test deliveries.

Typical use and users

Used by OLED module manufacturers, device suppliers, incoming-inspection and quality teams, test laboratories, procurement and compliance officers, and IECQ/CECC assessors. It provides manufacturers and test houses a common, generic set of rules for release testing, supplier qualification, reliability evaluation and contract specification baselines for consumer, automotive and industrial display applications.

Related standards

IEC 62341 is a multipart series. Commonly referenced related publications include other parts of IEC 62341 (for example Part 1-2 — terminology and symbols; Parts addressing environmental testing and specific measurement methods such as IEC 62341-6-1), IEC 60747 series (semiconductor device standards), ISO/IEC sampling and inspection standards (ISO 2859 / IEC 60410), and IECQ/CECC quality-assurance rules. Sectional or detail specifications for particular OLED product families should be consulted for specific limits and test sequences.

Keywords

OLED, organic light emitting diode, displays, IEC 62341, generic specification, quality assessment, sampling, AQL, LTPD, electro‑optical measurement, endurance testing, environmental testing, IECQ, CECC.

FAQ

Q: What is this standard?

A: IEC 62341-1-1:2009 (adopted as BS/EN versions) is the generic specification for OLED displays that defines quality-assessment procedures, measurement conditions and general test rules for manufacturers and test laboratories.

Q: What does it cover?

A: It covers general procedures and rules for electrical and optical measurements, environmental and mechanical testing principles, endurance testing, sampling and lot-inspection plans, screening and handling, marking and traceability, and quality-approval/capability-approval processes. Device-specific limits and test sequences are supplied by sectional/detail specifications that reference this generic document.

Q: Who typically uses it?

A: OLED module and panel manufacturers, component suppliers, QA and test labs, procurement and compliance teams, certification bodies and IECQ/CECC assessors use this standard to define release criteria, supplier qualification and test procedures.

Q: Is it current or superseded?

A: The base edition is IEC 62341-1-1:2009 (published 7 April 2009). As published by IEC, the edition is stable and was published in 2009; IEC lists a stability/maintenance planning date (stability information on the IEC catalogue). National adoptions (EN/BS/UNE) were published/ratified in 2010–2011. Users should check the IEC catalogue or their national standards body for any amendments, revisions or later parts in the 62341 series before relying on the document for the latest procedural or normative changes.

Q: Is it part of a series?

A: Yes. IEC 62341 is a multipart series covering OLED displays; Part 1-1 is the generic specification and is intended to be used together with other parts (for example Part 1-2 for terminology, parts on measurement methods and environmental test methods) and with sectional/detail specifications for specific device types.

Q: What are the key keywords?

A: OLED, organic light emitting diode, display, IEC 62341, generic specification, quality assessment, sampling, electro‑optical measurement, endurance testing, environmental testing, IECQ.