DD CEN TS 1852-3-2003 (2006) PDF

Full title and description

STB DD CEN TS 1852-3:2003 (adopted as STB DD 2006) — "Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP) — Part 3: Guidance for installation". This document is a material‑specific guidance (installation recommendations) accompanying the EN 1852 series for polypropylene non‑pressure underground drainage systems; the version referenced here is the CEN Technical Specification 1852‑3 published in 2003 and later amended (A1:2005), and appears as a national adoption under the STB DD designation in 2006.

Abstract

This Technical Specification gives recommended practices for storage, handling, jointing and installation of polypropylene (PP) pipes and fittings used for non‑pressure underground drainage and sewerage systems. It complements the product specifications and conformity guidance in the EN/EN-V and provides installation rules for application area codes "U" (outside building) and "D"/"UD" (buried in or outside building structures).

General information

• Status: Original CEN/TS withdrawn/replaced at CEN level; national STB adoption recorded as 2006 (national status may vary by country/registry).
• Publication date: CEN/TS 1852‑3 first published 2003 (June 2003); amendment A1 published 2005 (June 2005); STB national adoption indicated in 2006.
• Publisher: European Committee for Standardization (CEN); adopted/issued nationally under the STB DD designation for the STB catalogue.
• ICS / categories: 23.040.05, 23.040.20, 23.040.45, 93.030 (pipeline components, external sewage systems, plastics piping systems, civil engineering).
• Edition / version: CEN/TS 1852‑3:2003 with amendment A1:2005; national adoption labelled STB DD CEN TS 1852‑3‑2003 (2006).
• Number of pages: 11 pages (technical specification main part).

Scope

The document provides installation guidance for polypropylene (PP) piping systems intended for non‑pressure underground drainage and sewerage (outside and buried applications). It is intended to be used together with EN/ENV 1046 and EN 1610 and applies to systems marked for application area code "U" (outside building) and "D" or "UD" (buried within or outside building structures). The guidance covers selection of stiffness series (SN), storage, handling at low temperatures, jointing techniques (push‑fit elastomeric seals and butt fusion), alignment/straightness limits, connections to rigid structures, repair and on‑site testing recommendations.

Key topics and requirements

• Choice of stiffness (SN) series for pipes and fittings for different load/installation conditions.
• Storage in sunlight and material protection prior to installation.
• Handling and installation procedures at low temperatures to avoid damage.
• Recommendations for push‑fit (elastomeric) joints and for butt‑fusion jointing (including jointing parameters and quality considerations).
• Maximum permissible deviation from straightness during installation and bedding requirements.
• Guidance for connections to rigid structures and to existing pipes, including sealing and transition practices.
• Repair procedures for damaged pipes and fittings on site.
• On‑site testing guidance and inspection checks to verify installation integrity and conformity.

Typical use and users

Used by civil and drainage engineers, site contractors/installation crews, manufacturers and suppliers of PP drainage systems, quality and conformity assessors, specifiers and authorities drafting or checking installation contracts and construction specifications for external sewerage and drainage works.

Related standards

EN 1852 series (other parts: Part 1 — product specifications and Part 2 — conformity/assessment guidance), ENV/EN 1046 (installation practice), EN 1610 (execution and testing of drainage systems), CEN/TS 1852‑3:2003/A1:2005 (amendment), and later guidance/revisions collected in CEN/TR 1046:2014 which superseded or consolidated installation guidance in this area. National adoptions (STB DD) derive from the CEN text and may include national forewords or date of adoption (2006 for the STB listing referenced here).

Keywords

polypropylene, PP, plastics piping systems, non‑pressure drainage, sewerage, installation guidance, push‑fit joints, butt fusion, SN stiffness, external drainage, EN 1852, STB DD

FAQ

Q: What is this standard?

A: It is CEN Technical Specification CEN/TS 1852‑3:2003 — Part 3 (Guidance for installation) for polypropylene (PP) piping systems used in non‑pressure underground drainage and sewerage; the title appears also as a national adoption under the STB DD designation (2006).

Q: What does it cover?

A: Installation recommendations — selection of pipe stiffness, storage/handling, jointing methods (push‑fit and butt fusion), straightness limits, connections, repairs and on‑site testing for PP non‑pressure drainage systems used outside or buried inside/outside buildings.

Q: Who typically uses it?

A: Designers, installation contractors, manufacturers/suppliers of PP drainage systems, site inspectors and conformity assessors, and procurement/specification authors for drainage projects.

Q: Is it current or superseded?

A: The original CEN/TS 1852‑3:2003 (with A1:2005) has subsequently been superseded by later CEN guidance/trs (for example CEN/TR 1046:2014) and many national adoptions were withdrawn; withdrawal/replacement dates at CEN and national levels vary (withdrawal actions around December 2013–January 2014 at CEN level and some national withdrawals noted by 15 February 2016). Check the relevant national standards body registry for the STB DD national legal/current status for your country and year of interest.

Q: Is it part of a series?

A: Yes — it is Part 3 of EN 1852 (Plastics piping systems for non‑pressure underground drainage and sewerage — Polypropylene). The series includes product specification and conformity guidance parts and may be amended; Part 3 is the installation guidance element.

Q: What are the key keywords?

A: Polypropylene, PP, drainage, sewerage, plastics piping systems, installation guidance, push‑fit joints, butt fusion, stiffness SN, EN 1852, STB DD.