DIN 580 2024-05 PDF

Full title and description

STB DIN 580: Lifting eye bolts — Specification for steel and stainless-steel eyebolts used as lifting points; edition 2024-05 (Ringschrauben).

Abstract

This standard specifies dimensions, material and mechanical requirements, marking, testing and user information for lifting eye bolts (ringschrauben) made of steel and stainless steel intended as fixed attachment points or as part of slings. It addresses safe working loads, temperature range, inspection and CE/Regulatory considerations for use within the Machinery Directive framework. The 2024-05 edition replaces the previous 2018 edition.

General information

• Status: Published / Current standard (active edition).
• Publication date: 2024-05 (published 1 May 2024).
• Publisher: Deutsches Institut für Normung (DIN e. V.), available through DIN Media / Beuth distribution channels.
• ICS / categories: 21.060.10 — Bolts, screws, studs (Fasteners).
• Edition / version: Edition 2024-05 (replaces DIN 580:2018-04).
• Number of pages: 26 pages (original language: German; English translation available as an option).

Scope

The standard applies to lifting eye bolts with metric external threads made of steel and stainless steel, defining their geometrical dimensions, mechanical properties, marking and testing. It covers eyebolts intended for use as part of slings or as permanently fixed lifting/anchoring points on machinery and equipment, and gives guidance for correct mounting, inspection and temperature-dependent use (typically −20 °C to +200 °C without reduction in rated capacity for specified types). Annexes include guidance on regulatory compliance (Machinery Directive) and practical user information.

Key topics and requirements

• Dimensional specifications and tolerances for metric thread sizes (M6 up to larger diameters) and corresponding eye geometry.
• Material grades and surface finishes (typical: C15 steel, stainless A2/A4 options) and minimum mechanical properties.
• Rated load capacities, minimum breaking forces and recommended safety factors for vertical and angled pulls.
• Marking, traceability and user information requirements (including inspection before use and prohibition of lateral loading unless specified).
• Testing and verification procedures (tensile testing, sampling, acceptance criteria).
• Temperature range and notes on de-rating (guidance for −20 °C to +200 °C where applicable).
• Reference to relevant regulatory requirements (CE marking when used as mobile lifting equipment under the Machinery Directive within the EU) and national implementation notes in annexes.

Typical use and users

Commonly used by machine builders, equipment manufacturers, rigging and lifting engineers, maintenance and safety inspectors, procurement specialists and fastener suppliers. Typical applications include machine attachment points, transport and lifting fixtures, assembly and maintenance anchor points across industrial, construction and maritime environments (with material choice adjusted for corrosion resistance where required).

Related standards

Related / equivalent documents and references include DIN EN ISO 3266 (where applicable), DIN 582 (eye nuts), national equivalents such as UNI 2947 and CSN/PN variants, and other DIN/EN standards addressing lifting accessories, slings and testing methods. The 2024 edition explicitly replaces DIN 580:2018-04.

Keywords

lifting eye bolts, ringschrauben, eyebolts, fasteners, bolts, lifting points, load capacity, marking, testing, DIN 580, DIN standard, CE marking, Machinery Directive, dimensions, C15 steel, stainless steel.

FAQ

Q: What is this standard?

A: DIN 580 (2024-05) is the DIN specification that sets requirements for lifting eye bolts—defining dimensions, material, testing, marking and user information for steel and stainless-steel eyebolts used as lifting or anchoring points.

Q: What does it cover?

A: It covers geometrical dimensions, mechanical properties, load capacities and safety considerations, inspection and testing requirements, allowable temperature ranges for use, and guidance on regulatory compliance (e.g., CE marking when applicable).

Q: Who typically uses it?

A: Machine builders, lifting and rigging engineers, safety/inspection personnel, procurement teams and fastener manufacturers/suppliers use this standard to select, specify and verify eyebolts for lifting and anchoring applications.

Q: Is it current or superseded?

A: The 2024-05 edition is the current published edition and supersedes the previous edition (DIN 580:2018-04).

Q: Is it part of a series?

A: DIN 580 is part of the family of fastener and lifting-accessory standards (ICS 21.060.10) and is commonly referenced alongside related standards for eye nuts, lifting accessories and sling components (e.g., DIN 582, EN/ISO documents covering slings and lifting hardware).

Q: What are the key keywords?

A: Lifting eye bolts, ringschrauben, eyebolts, load capacity, marking, testing, fasteners, DIN 580, lifting points, CE/ Machinery Directive.