UNE-EN 16430-3-2015 PDF
Name in English:
STB UNE-EN 16430-3-2015
Name in Russian:
СТБ UNE-EN 16430-3-2015
Standard UNE-EN 16430-3-2015 original PDF full version. Additional info + preview on request
Full title and description
UNE‑EN 16430‑3:2015 — Fan assisted radiators, convectors and trench convectors — Part 3: Test method and rating for cooling capacity. This national adoption (UNE) reproduces the European/EN text and specifies the laboratory test method and rating procedure for the dry cooling capacity (no condensation) of fan‑assisted and related convector products.
Abstract
This standard defines the test conditions, measurement procedures and reporting format used to determine and declare the cooling capacity (sensible, dry operation — no condensation) of factory‑assembled or kit fan‑assisted radiators, convectors and trench convectors. It covers devices with dedicated fans and similar products where the cooling element and fan(s) are intended to operate together. The standard produces comparable rated cooling capacities for use in product datasheets and performance comparisons.
General information
- Status: Current (national adoption of the EN text in the UNE catalogue).
- Publication date: 2015 (UNE publication listed 25 November 2015; EN edition published earlier in 2015).
- Publisher: Asociación Española de Normalización (UNE) — national publication of the EN text.
- ICS / categories: 91.140.10 (Central heating systems; HVAC products and testing).
- Edition / version: UNE‑EN 16430‑3:2015 (part of the EN 16430 series; identical to EN 16430‑3:2014/2015 national adoptions).
- Number of pages: National UNE edition: about 18 pages (typical published UNE copy).
Scope
The standard applies to laboratory testing and rating of the dry cooling capacity (no condensation) of fan‑assisted radiators, convectors and trench (floor) convectors — both factory‑assembled products and kits — when the cooling element and fan(s) are dedicated to each other. It covers fan‑assisted and non‑fan variants where the fan(s) is/are specifically associated with the cooling element, and establishes test conditions, measurement points and reporting rules to enable consistent product declarations.
Key topics and requirements
- Definition of test rig, environmental conditions and instrumentation required for cooling‑capacity measurements (dry mode, no condensation).
- Specification of operating points (air and water inlet temperatures, flow rates, fan settings) and steady‑state criteria for data capture.
- Measurement and calculation methods for sensible cooling capacity and expressed rating values for datasheets.
- Instructions for reporting test results, tolerances and uncertainty considerations to ensure reproducibility between laboratories.
- Requirements for testing product variants (factory‑assembled units and kits) and for cases where fans are dedicated to the cooler.
Typical use and users
Used by HVAC product manufacturers (radiators, convectors, trench convectors), test and calibration laboratories, product certification bodies, specifiers (consulting engineers and architects) and procurement teams who need a harmonised, repeatable method to determine declared cooling capacity for selection, comparison and regulatory or contractual compliance.
Related standards
Part of the EN 16430 series (other parts cover thermal output and test methods); related test and rating standards include EN 16430‑1 and EN 16430‑2, EN 442 (radiators and convectors test methods/ratings) and other CEN HVAC test standards. The EN text is maintained under CEN technical committees responsible for central heating and convector testing.
Keywords
Fan assisted radiators, convectors, trench convectors, cooling capacity, test method, rating, EN 16430, UNE, HVAC testing, central heating systems, no condensation, laboratory measurement.
FAQ
Q: What is this standard?
A: UNE‑EN 16430‑3:2015 is the Spanish (UNE) publication of the European standard that defines the laboratory test method and rating procedure for the cooling capacity of fan‑assisted radiators, convectors and trench convectors.
Q: What does it cover?
A: It covers the test rig conditions, measurement procedures, operating points and reporting format for determining sensible (dry) cooling capacity with no condensation, for factory‑assembled and kit products where fans are dedicated to the cooling element.
Q: Who typically uses it?
A: HVAC manufacturers, independent test laboratories, certifiers, consulting engineers and buyers who need standardised, comparable cooling‑capacity data for product selection, performance claims and compliance.
Q: Is it current or superseded?
A: The EN/UNE 16430‑3 text published in 2015 is the operative test‑method document referenced in national catalogues; national adoptions indicate it is current (periodic review applies via CEN national bodies). Users should check their national standards catalogue for any later revisions or amendments issued after 2015.
Q: Is it part of a series?
A: Yes — EN 16430 is a multi‑part series addressing fan assisted radiators, convectors and trench convectors; Part 3 covers cooling capacity test method and rating, while other parts cover thermal output and related test procedures.
Q: What are the key keywords?
A: Fan assisted radiators; convectors; trench convectors; cooling capacity; test method; rating; EN 16430; UNE; HVAC testing; no condensation.