VDE 0604-122 DIN EN 61534-22 2009-11 PDF

Full title and description

STB VDE 0604-122 / DIN EN 61534-22:2009-11 — Powertrack systems — Part 22: Particular requirements for powertrack systems intended for on‑floor or under‑floor installation (German version of EN 61534-22:2009). This document specifies particular requirements and tests for powertrack (PT) systems and floor service units mounted on, under or flush with the floor, as a complement to the general requirements in EN/IEC 61534‑1.

Abstract

This standard defines the special design, mechanical, electrical, thermal and safety requirements for powertrack systems used in floor and under‑floor applications (including floor service units). It covers constructional features, marking and documentation, classification, required tests (mechanical loading, temperature rise, electrical insulation, fire behaviour and EMC considerations) and installation‑relevant aspects to ensure safe, robust distribution of electrical energy in domestic, commercial and light industrial premises.

General information

• Status: Withdrawn (2009 edition superseded by a later edition — DIN EN 61534-22 VDE 0604-122:2015-03).
• Publication date: November 2009 (EN/IEC base publication 2009).
• Publisher: VDE (German adoption of EN 61534-22; published as a DIN/VDE German version of the European/IEC text).
• ICS / categories: 29.060.10 (Wires) and 29.120.20 (Connecting devices).
• Edition / version: EN 61534-22:2009 — German version published November 2009 (VDE 0604-122).
• Number of pages: Approximately 24 pages (typical published length for the 2009 issue).

Scope

Applies to powertrack (PT) systems and floor service units designed to be mounted on the floor, installed under the floor or installed flush with the floor. The part addresses design and test requirements specific to floor installation (mechanical load and impact, ingress protection, thermal behaviour under floor coverings, earthing/bonding, tap‑off integrity and safe access) and is intended to be used together with EN/IEC 61534‑1 (general requirements for PT systems). It does not replace national installation rules but specifies product requirements to support safe use in floor environments.

Key topics and requirements

• Constructional and dimensional requirements for floor and underfloor powertrack sections and floor service units.
• Mechanical strength and load tests (simulating pedestrian/static loads, impact and repetitive use specific to floor mounting).
• Electrical safety: insulation, clearances/creepage, earthing/grounding and current‑rating verification (compatibility with IEC/EN 61534‑1 limits).
• Temperature‑rise and thermal performance tests including effects of floor coverings and restricted ventilation.
• Ingress protection and sealing requirements for on‑floor/under‑floor installations (IP ratings relevant to floor use and dust/moisture exposure).
• Fire behaviour and flammability tests appropriate for installed trunking and components in floor environments.
• Tap‑off outlet integrity, retention and safe access (preventing accidental contact and ensuring reliable connection under floor conditions).
• Marking, documentation and installation information (including guidance for installers and compatibility notes with EMC suppression devices).

Typical use and users

Manufacturers and designers of powertrack and busbar trunking systems, testing laboratories, certification bodies, electrical installers and specifiers for commercial, retail and specialist residential projects where modular floor power distribution is required. Also used by product compliance engineers preparing test reports and by procurement/specification teams validating product suitability for floor/underfloor installations.

Related standards

Primary related documents include EN/IEC 61534‑1 (Powertrack systems — Part 1: General requirements) and other parts of EN/IEC 61534 (e.g., parts for wall/ceiling mounting). The 2009 part 22 has later consolidated/amended editions (notably the 2015 and subsequent amendments) which update test methods and installation notes. National implementation documents and installation rules (local wiring regulations) should be consulted for site installation requirements.

Keywords

Powertrack, powertrack systems, powerrail, floor trunking, underfloor distribution, floor service unit, tap‑off, busbar, VDE 0604‑122, EN 61534‑22, IEC 61534‑22, on‑floor installation, under‑floor installation, electrical trunking.

FAQ

Q: What is this standard?

A: It is the German adoption (VDE 0604‑122) of EN/IEC 61534‑22:2009 — a part of the Powertrack systems series that sets particular product requirements and tests for powertrack systems intended for on‑floor or under‑floor installation.

Q: What does it cover?

A: It covers construction, mechanical and electrical test requirements, marking and documentation, ingress protection, thermal and fire behaviour, tap‑off integrity and installation‑related product guidance specific to floor and under‑floor powertrack systems. It is intended to be used with the general requirements in EN/IEC 61534‑1.

Q: Who typically uses it?

A: Product manufacturers, test laboratories, certification bodies, electrical installers and specifiers working with floor or under‑floor power distribution systems. Compliance and safety engineers consult it when designing and certifying PT products.

Q: Is it current or superseded?

A: The 2009 edition has been superseded by later editions/amendments (the VDE record shows the 2009 issue was replaced by a 2015 German edition and subsequent amendments). Users should reference the latest EN/IEC 61534‑22 edition and amendments for current requirements.

Q: Is it part of a series?

A: Yes — EN/IEC 61534 is a multipart series for powertrack systems; Part 1 contains general requirements and other parts address particular mounting modes (e.g., wall/ceiling, floor) and special applications. Use Part 22 together with Part 1 for full product compliance.

Q: What are the key keywords?

A: Powertrack, floor service unit, underfloor, on‑floor, tap‑off, busbar, VDE 0604‑122, EN 61534‑22, mechanical load test, temperature rise, ingress protection, earthing.