Turkmenistan standards PDF

↑
St NASM 21087-2011 (Rev 1)

Nut, self-locking, plate, side by side, reduced rivet spacing, low height, CRES, 125 ksi Ftu, 450 °F & 800 °F. Original standard NASM 21087-2011 (Rev 1) in PDF full version. Additional info + preview on request

Document status: Replaced by

€35
St NASM 21090-2011 (Rev 1)

Screw, self-locking, 250 °F, steel, 55 ksi Ftu, pan head, cross recessed. Original standard NASM 21090-2011 (Rev 1) in PDF full version. Additional info + preview on request

Document status: Replaced by

€30
St NASM 21094-2011 (Rev 1)

Bolt, self-locking, 250 °F, steel, 75 ksi Fsu, 125 ksi Ftu, hex head. Original standard NASM 21094-2011 (Rev 1) in PDF full version. Additional info + preview on request

Document status: Replaced by

€35
St NASM 21095-2012 (Rev 2)

Bolt, tension, hex head, self-locking, 250 °F, CRES, 80 ksi Ftu, 48 ksi Fsu. Original standard NASM 21095-2012 (Rev 2) in PDF full version. Additional info + preview on request

Document status: Active

€35
St NASM 21098-2010 (Rev 1)

Bolt, self-locking, steel, 160 ksi Ftu, 250 °F, 12 point, external wrenching (externally wrenching cap screws). Original standard NASM 21098-2010 (Rev 1) in PDF full version. Additional info + preview on request

Document status: Replaced by

€35
St NASM 21130-2012 (Rev 2)

Bolt, self-retaining, positive locking, CRES, 90 ksi Fsu, 63 ksi Ftu, 100° flush head, 450 °F & 650 °F. Original standard NASM 21130-2012 (Rev 2) in PDF full version. Additional info + preview on request

Document status: Replaced by

€35
↑