TDS PDF
Method of Sampling Crude Oil and Petroleum Products. Incomplete source- the file ends after printed page 12 within clause 7.1.1; the rest of the procedure and subsequent clauses/figures are absent. Original standard JIS K 2251-1980 in PDF. Additional info + preview on request
Document status: Replaced by St JIS K 2251-1991
Testing methods for paints — Part 5- Mechanical property of film — Section 6- Adhesion test (Cross-cut test). Limited source- the beginnings of lines and designations in the main text are clipped on printed page 4; the separate correction does not restore the damaged page. This edition is listed as current by the standards distributor. Original standard JIS K 5600-5-6-1999 in PDF. Additional info + preview on request
Document status: Active
Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis. Limited source- parts of three lines at the beginning of clause 5 Test piece on printed page 3 have been removed by a white rectangle. This edition is listed as current by the standards distributor. Original standard JIS K 7196-1991 in PDF. Additional info + preview on request
Document status: Active
Physical testing methods for molded products of thermosetting polyurethane elastomers. Incomplete source- printed page 80 containing Fig. 20(A) is missing; examples A-2/B-2 on page 70 are too dark for reliable identification of fine cracks. This edition is listed as current by the standards distributor. Original standard JIS K 7312-1996 in PDF. Additional info + preview on request
Document status: Active
Calcium Oxide. Limited source- line endings on main sheets No. 2–4 are clipped, including test quantities and units; supplementary sheets do not remedy the defect. Original standard JIS K 8410-1961 in PDF. Additional info + preview on request
Document status: Replaced by
Light-Weight Rolling Door for Buildings (the next normative state is JIS A 4704-1994 under the retained revision history; its publication form is confirmed as a Standard; its exact title and door-versus-components scope remain unconfirmed). Original standard JIS A 4704-1988 in PDF. Additional info + preview on request. The historical replacement is retained. Its publication form is confirmed as a Standard; its exact title and door-versus-components scope remain unconfirmed. This is not complete current verification of the replacement metadata.
Document status: Replaced by